User manual CME MATRIX X V1.0

[. . . ] Matrix X User's Manual Version 1. 0 Version 1. 0 www. cme-pro. com Trademarks: CME and Matrix X are the registered trademarks of Central Music Co. All the other trademarks belong to their respective owners. FCC INFORMATION (U. S. A) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. [. . . ] To avoid voiding your warranty, only use the power adapter supplied for use with Matrix X. 15. Head Phone 2 Output The second headphone output connector (stereo) Matrix X User's Manual 17. Monitor Output Signal monitor output connectors, the left channel is on the top, the right channel is on the bottom. Both of the two connectors are balanced 1/4" TRS jacks. 18. Sound Card Output These are stereo outputs of Matrix X. Please connect here to the Line In of your sound card or the Aux In of an external device. These jacks could be used as auxiliary outputs as well. The Left channel is on the top and the Right channel is on the bottom. Both of the two connectors are balanced 1/4" TRS jacks. 19. Sound Card Input These are stereo inputs to Matrix X. Please connect sound card's Line Out or the Line Out of an external device to here. These jacks could be used as auxiliary inputs as well. The Left channel is on the top and the Right channel is on the bottom. Both of the two connectors are balanced 1/4" TRS jacks. 20. Line Input External devices connect to these jacks to transmit analog signals into Matrix X. The Left channel is on the top and the Right channel is on the bottom. Both of the two connectors are balanced 1/4" TRS jack. The unbalanced signals go into Matrix X from here can be converted into balanced signals to prevent noise interference. Matrix X User's Manual Connection examples The Matrix X is a very flexible device that features many input and output connectors for different usage and applications. You can connect various external equipment to meet your audio needs. Connection examples of front panel Note: You can only connect ONE device to the XLR / TS combo connector at the same time, either an XLR microphone or TS E. guitar/bass. Shows that the XLR / TS combo connector can be used to connect XLR microphones, as well as TS E. guitar/bass, but you cannot connect XLR device and TS device at the same time. Matrix X User's Manual Connection examples of rear panel Signal flow chart (block diagram) The flow chart below shows how signals are routed through the Matrix X, which may help you better understand how to use the Maxtrix X. Matrix X User's Manual Examples of Matrix X usage Matrix X features various input and output connectors to use either in standalone mode or used with sound card or external device. It will meet most of your music making, practicing and listening needs. There are some examples of Matrix X usage below to explain how to set up and connect Matrix X to your system. [. . . ] Connect the microphone to the XLR jack of the combo connector Matrix X User's Manual on the front panel of the Matrix X. Adjust the gain by turning the "Mic / Guitar In" knob. Set the recording device driver in the recording software. Pick-up the audio signal from the microphone and start recording in the software. [. . . ]