User manual COBRA CIR 1000 E QUICK START GUIDE

[. . . ] The ventilation shall not be impeded by covering the ventilation openings with items, such as newspapers, table cloths, curtains, etc. Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. [. . . ] Press the MODE button repeatedly until <FM Mode> appears. Or enter <Main menu>, rotate the Scroll knob to <FM>, and then press to confirm. For initial use, it will start at the beginning of the FM frequency range (87. 50MHz). Otherwise, the last FM station you listened to will be selected. 3. Rotate the Scroll knob to increase or decrease the frequency by 0. 05MHz per step; Note: For US version, the frequency is 0. 10MHz per step. 4. For `auto-searching' active stations, simply press the Scroll knob. Note: For `auto-searching' next active station: a. The unit will display the frequency changes until it stops on the next station After it runs to the end of the frequency range, it will continue it's search from the beginning frequency. A. Press BACK until the cursor points to <Scan setting>, and then press to confirm. 2. Rotate the Scroll knob to your desired setting, and then press to confirm. 15 Setting Station Presets Your radio can store 4 Internet station presets and 4 FM station presets respectively. To store the current station: Press and hold any one of the 1-4 button for 2 sec. , and it will display `Preset stored': Selecting a Preset station To select a stored station: 1. Simply press the corresponding preset button. Then radio will load that station immediately. Note: Do not hold the button of a stored station down - if you do so, the currently playing station will overwrite the stored one in the preset. How to change the Station Information It is possible to view the information that is displayed on the second line of the display when listening to a program. To view this information, press the INFO button repeatedly. In <Auxiliary Input mode>, this function is out of service. 16 AUX IN Operation Mode 1. To listen to an external audio source, press the MODE button repeatedly until <Auxiliary Input Mode> appears in the display. Or enter <Main Menu>, and then rotate the Scroll knob to <Auxiliary Input>, and press to confirm. 2. Connect one end of the audio cable to the headphone (or auxiliary out) socket of your source device, and the other end to AUX IN socket on the rear of your radio. The radio will display the following: 3. To gain optimal volume levels, adjust the output volume level on both the source device and radio itself . Your radio is now a high quality digital audio speaker system. Note: AUX IN enables quick and easy connection to an MP3 player or other external sound sources. 17 General Operations Setting the Clock 1. At <Main menu> subdirectory, rotate the Scroll knob to <System setup>, and press to confirm. 2. Rotate the Scroll knob to <Time setup>, and press to confirm. 3. With the cursor pointing to <Set clock>, press to confirm. Rotate the Scroll knob to change the hour, and press to confirm. Now, it asks you to set the minute. 5. Set the minute by using the Scroll knob. Rotate the Scroll knob to <Set date>. Set the date by using the same method. You can also set the clock through `Auto Update' Note: For <Auto update>, please ensure your Radio is successfully connected to the Internet. 18 1. [. . . ] If the problem persists, then you may need to consult your network configuration. If your Radio can connect to the network successfully, but is unable to play particular stations, it may be due to one of the following causes: a. The station is not broadcasting at this time of the day (remember it may be located in a different time zone). The station has reached the maximum allowed number of simultaneous listeners. [. . . ]