User manual COBRA CXT400 QUICK START GUIDE

[. . . ] Introduction Making Life Easier and Safer Owner's Manual Staying in touch with your family and friends is convenient and easy when using your microTALK® radio. Some of the many uses you will discover include: Communicating with others while hiking, biking and working; keeping track of family and friends at a crowded public event; checking with travel companions in another car; talking with neighbors; arranging meeting spots with others while shopping at the mall. Belt Clip Secure your microTALK radio while on the go. Carrying your microTALK radio with you is easy when using the belt clip. The belt clip easily attaches to your belt, purse or backpack. Customer Assistance For Assistance in the U. S. A. [. . . ] Press the Enter/Hi·Low button to switch from CTCSS to DCS. The DCS icon and privacy code numbers will flash on the display. The Channel Up or Channel Down button can then be used to select a DCS privacy code (01 through 83) for the channel. If "OFF" flashes in place of the privacy code numbers, a privacy code is already set in the opposite (CTCSS or DCS) system. Press the Channel Up or Channel Down button to cancel the opposite code and select a privacy code from the active system for the selected channel. Press the Enter/Hi·Low button to enter the channel/privacy code in the selected memory location. Radio then proceeds to next memory location, which will blink. Press the Mode/Lock button to enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions. Press the Talk button to enter the channel/privacy code in the selected memory location and exit mode functions. Upon release of the Talk button, the radio will enter Standby mode on the channel/privacy code just entered. Mode/Lock Button Enter/Hi-Low Button 3. Press the Enter/Hi·Low button to enter a new memory location or edit an already programmed memory location. The channel numbers will flash on the display. Press the Channel Up or Channel Down button to select a channel (1 through 22). The CTCSS icon and privacy code numbers will flash on the display. Memory Icon To recall a stored memory channel location: 1. Press the Mode/Lock button until the Memory icon and the memory location number flash on the display. Press the Channel Up or Channel Down button to select a memory location (0 through 9). If a location has been programmed before, its associated channel/privacy code will be shown on the display. 12 13 Operation Mode Functions 3. Press the Talk button to return to Standby mode on the selected memory location. A memory location can be reprogrammed at any time it is displayed. Press the Enter/Hi·Low button to begin. Introduction Operation Customer Assistance Warranty Channel Buttons While recalling a stored memory location, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions. Mode/Lock Button b. Press the Mode/Lock button to enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions. While de-programming a memory location, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions. [. . . ] If you have any questions, please call 773-889-3087 for assistance. For Products Purchased Outside the U. S. A. Please contact your local dealer for product service information. · Safety Information for microTALK Radios Your wireless handheld portable transceiver contains a low power transmitter. When the talk button is pushed, it sends out radio frequency (RF) signals. [. . . ]