User manual COBRA CXT400C QUICK START GUIDE

[. . . ] Introduction Making Life Easier and Safer Owner's Manual Staying in touch with your family and friends is convenient and easy when using your microTALK® radio. Some of the many uses you will discover include: Communicating with others while hiking, biking and working; keeping track of family and friends at a crowded public event; checking with travel companions in another car; talking with neighbors; arranging meeting spots with others while shopping at the mall. Belt Clip Secure your microTALK radio while on the go. Carrying your microTALK radio with you is easy when using the belt clip. The belt clip easily attaches to your belt, purse or backpack. Customer Assistance For Assistance in Canada or the U. S. A. [. . . ] The DCS icon and privacy code numbers will flash on the display. The Channel Up or Channel Down button can then be used to select a DCS privacy code (01 through 83) for the channel. If "OFF" flashes in place of the privacy code numbers, a privacy code is already set in the opposite (CTCSS or DCS) system. Press the Channel Up or Channel Down button to cancel the opposite code and select a privacy code from the active system for the selected channel. Press the Enter/Hi·Low button to enter the channel/privacy code in the selected memory location. Radio then proceeds to next memory location, which will blink. Press the Mode/Lock button to enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions. Press the Talk button to enter the channel/privacy code in the selected memory location and exit mode functions. Upon release of the Talk button, the radio will enter Standby mode on the channel/privacy code just entered. Mode/Lock Button To recall a stored memory channel location: 1. Press the Mode/Lock button until the Memory icon and the memory location number flash on the display. Channel Buttons Memory Icon 2. Press the Channel Up or Channel Down button to select a memory location (0 through 9). If a location has been programmed before, its associated channel/privacy code will be shown on the display. Enter/Hi-Low Button 12 English Nothing Comes Close to a Cobra® 13 Operation Mode Functions 3. Press the Talk button to return to Standby mode on the selected memory location. A memory location can be reprogrammed at any time it is displayed. Press the Enter/Hi·Low button to begin. Introduction Operation Customer Assistance Warranty Channel Buttons While de-programming a memory location, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions. Channel Scan Your microTALK radio can automatically scan channels. Channel Buttons Mode/Lock Button · While recalling a stored memory location, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions. Mode/Lock Button To de-program a memory location: 1. Press the Mode/Lock button until the Memory icon and the memory location flash on the display. Memory Icon To scan channels: 1. Press the Mode/Lock button until the Scan icon and the channel numbers flash on the display. Scanning Channels 2. Press the Channel Up or Channel Down button to begin scanning channels. The radio ignores specific privacy codes while scanning channels. 2. Press the Channel Up or Channel Down button to select the memory location (0 through 9). [. . . ] Unauthorized antennas, modifications, or attachments could damage the transmitter and may violate FCC regulations. Normal Position: Hold the transmitter approximately five cm (two inches) from your face and speak in a normal voice, with the antenna pointed up and away. Trademark Acknowledgement Cobra®, microTALK®, Nothing Comes Close to a Cobra®, VibrAlert® and the snake design are registered trademarks of Cobra Electronics Corporation, USA. Cobra Electronics CorporationTM is a trademark of Cobra Electronics Corporation, USA. [. . . ]