User manual COBRA ESD6160ML

[. . . ] ESD-6160CS. MANUAL. qx 10/23/98 4:52 PM Page 1 Installing and Using Your 1. What You'll Need To Install The ESD-6160CS: NOTE: Detailed instructions on opposite side 3. Indicators and Visual Alerts Power DETECTION SYSTEM Model ESD TM-6160CS The unit will chirp 3 times and the red single digit display will illuminate . Set Display Brightness NORMAL Either an , or will illuminate when the unit is on. X Band Radar X Blinks faster as source approaches K and Ka Band Radar DIM DIMMER ESD-6160CS Windshield Bracket Hook and Loop Material (For on-dash mounting) Power Cord K/Ka DARK Blinks faster as source approaches 2. [. . . ] You may be asked to send your unit to the Cobra factory. It will be necessary to furnish the following, in order to have the product serviced and returned. For Warranty Repair, include some form of proof-of-purchase, such as a mechanical reproduction or carbon or sales receipt. If you send the original receipt it cannot be returned. For example­must include detector, bracket with suction cups, and cord. Enclose a description of what is happening with the unit. Include a typed or clearly printed name and address of where the unit is to be returned. Pack unit securely to prevent damage in transit. If possible, use the original packing material. Ship prepaid and insured by way of a traceable carrier (to avoid loss in transit) such as United Parcel Service (UPS), Roadway Parcel Service (RPS), or First Class Insured Mail to Cobra Factory Service, Cobra Electronics Corporation, 6500 W. Cobra is not responsible for units not received if package has not been properly insured. If the unit is in warranty, upon receipt of your unit it will either be repaired or exchanged depending on the model. Please allow approximately 3 to 4 weeks before contacting us for status. If the unit is out of warranty a letter will automatically be sent informing you of the repair charge or replacement charge. If you have any questions, please call 773-889-3087 for assistance. WARNING: Before leaving your car, make sure that you conceal your radar detector. This will reduce the possibility of break-in and theft of your unit. Use of this product is not intended to, and does not, ensure that the motorist and any passenger will not be involved in a traffic accident. It is only intended to alert the motorist that an emergency or service vehicle equipped with a CODE 3 or Cobra Safety Alert Transmitter is in the area as defined by the range of the product. Motorists are expected to exercise all due caution while using this product, and to observe and follow all applicable traffic laws. Operators of emergency or service vehicles are also expected to exercise all due caution while using this product, and to observe and follow all applicable traffic laws. 5, 497, 148 LIDARs must have a clear line of sight to target a vehicle during the entire measurement interval. Intervening objects such as signposts, utility poles, tree branches, etc. , will prevent a valid speed reading. · Does weather have any effect on LIDAR? [. . . ] Replacing Power Cord Fuse Unscrew cap of cigarette lighter adapter and remove fuse. Troubleshooting If your COBRALASER DETECTOR ESD-6160CS isn't operating, we suggest you make the following checks: 1. Is the cigarette lighter socket clean and free from corrosion? Description STRAIGHT DC POWER CORD Including plug/fuse for ESD-6160CS CURLED TYPE POWER CORD For ESD-6160CS WINDSHIELD MOUNTING BRACKET (Prices subject to change without notice. ) Part No. = Amount 545-139-N-001 $10. 00 Limited One Year Warranty COBRA ELECTRONICS CORPORATION warrants that its COBRAradar detectors, and the component parts thereof, will be free of defects in workmanship and materials for a period of one (1) year from the date of first consumer purchase. [. . . ]