User manual COBRA ESD9100

[. . . ] 3 2 9100. MANUAL 8/9/00 12:12 PM Page 4 Installation Dash Mounting Dash Mounting Turn On and Adjust Volume Quick Start Turn On and Adjust Volume 1 1 Note It will be easy for you to remove and reinstall your Cobra ESD-9100 detector at any time using this hook and loop material on the dashboard. Remember: Without the means to adjust the angle of the detector (when mounted as above), be sure you that your Cobra ESD-9100 has a level, clear view of the road before you attach the hook and loop material. Peel protective paper off one side of hook and loop material. 2 Place on dash. Rotate ON-OFF Volume Control to left (away from you). An audible "tone" will indicate the unit is on. PWR LED on front of unit is illuminated. 3 Peel top paper off. 4 Place detector on hook and loop pad. 5 Plug power cord into detector. 6 Plug power cord into cigarette lighter. [. . . ] Most likely police radar on other side of hill or bridge. There are no false laser signals. Detection Facts About the Safety Alert® Traffic Warning System FCC-approved Safety Alert Transmitters emit microwave radar signals to indicate the presence of a safety-related concern. Depending on the frequency of these signals, as set on the transmitter, the outgoing signal can indicate whether the transmitter is on a speeding emergency vehicle or train, or at a stationary road hazard location. These microwave signals are located in the K-band and as a result, any radar detector which detects K-band radar will detect these Safety signals as standard K-band radar alerts. However, unlike a standard radar detector, your Cobra ESD-9100 is designed to differentiate between a standard K-band alert and a Safety Alert warning. Safety technology is relatively new so the number of transmitters in operation is still growing. You may not receive Safety Alert on a daily basis and should not be surprised to encounter some emergency vehicles, road hazards or trains not yet equipped with these transmitters, therefore failing to provide a signal. As Safety Transmitters become more prevalent (the number of operating transmitters is growing every day), these Safety Alerts will become more common. Replacing Power Cord Fuse Unscrew cap of cigarette lighter adapter and remove fuse. Troubleshooting If your COBRA LASER DETECTOR ESD-9100 isn't operating, we suggest you make the following checks: 1. Is the cigarette lighter socket clean and free from corrosion?19 Maintenance 18 9100. MANUAL 8/9/00 12:12 PM Page 20 Specifications Specifications GENERAL SPECIFICATIONS A. FREQUENCIES 1. UNIT DIMENSIONS 3-3/16"W x 1-1/4"H x 5"D 10. 525 GHz ± 50 MHz 24. 150 GHz ± 100 MHz 33. 4 - 36. 0 GHz 11. 4 GHz - 11. 7 GHz 24. 07, 24. 11, 24. 19 GHz 300 THz - 375 THz 300 THz - 770 THz 300 THz - 375 THz 300 THz - 375 THz Limited One Year Warranty COBRA ELECTRONICS CORPORATION warrants that its COBRA 9 Band Radar/Laser Detec tors, and the component parts thereof, will be free of defects in workmanship and materials for period of one (1) year from the date of first consumer purchase. This warranty may be enforced by the first consumer purchaser, provided that the product is utilized within the U. S. A. COBRA will, without charge, repair or replace, at its option, defective 9 Band Radar/Laser Detec tors, products or component parts upon delivery to the COBRA factory Service Department, accompanied by proof of the date of first consumer purchase, such as a duplicated copy of a sales receipt. You must pay any initial shipping charges required to ship the product for warranty service, but the return charges will be at Cobra's expense, if the product is repaired or replaced under warranty. Exclusions: This limited warranty does not apply; 1) to any product damaged by accident;2) in the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs;3) if the serial number has been altered, defaced or removed;4) if the owner of the product resides outside the U. S. A. All implied warranties, including warranties of merchantability and fitness for a particular purpose are limited in duration to the length of this warranty. COBRA shall not be liable for any incidental, consequential or other damages;including, without limitation, damages resulting from loss of use or cost of installation. Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the e xclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. Cobra Electronics Corporation 6500 West Cortland Street Chicago, Illinois 60707 www. cobraelec. com 20 21 9100. MANUAL 8/9/00 12:12 PM Page 22 Optional Accessories Item # Description Accessory Order Form Cost Ea. Amount 420-080-N-001 420-080-N-002 545-139-N-001 Straight 12V Power Cord Curled 12V Power Cord Windshield Mounting Bracket $10. 00 $10. 00 $7. 00 Prices subject to change without notic e. Straight 12V DC Power Cord Includes plug and fuse 420-080-N-001 $10. 00 Curled 12V DC Power Cord Includes plug and fuse 420-080-N-002 $10. 00 Windshield Mounting Bracket Includes suction cups 545-139-N-001 $7. 00 Tax Table Illinois residents add 7% Cook Co. residents add . 75% (7. 75% total) Chicago residents add 1% (8. 75% total) Indiana residents add 5% Michigan residents add 4 % Minnesota residents add 6% Ohio residents add 6% Wisconsin residents add 5% Subtotal (Tax if applicable) Shipping/handling $4. 00 Total For credit card orders fill out order form and fax to: 1. 773. 622. 2269 or call 1. 773. 889. 3087 (Press 1 from the main menu) 8:00 am - 8:00 pm, M-F, CST. You Can Find These Fine Accessories At Your Local Cobra Dealer If you wish, you can order directly from Cobra. [. . . ] If the unit is in war ranty, upon receipt of your unit it will either be repaired or exchanged depending on the model. Please allow approximately 3 to 4 weeks before contacting us for status. If the unit is out of warranty a letter will automatically be sent informing you of the repair charge or replacement charge. If you have any questions, please call 1. 773. 889. 3087 for assistance. Cobra Electronics Corp. © 1999 Printed in Thailand Part No. [. . . ]