User manual COBRA MT 650T QUICK START GUIDE

[. . . ] External Speaker/ Microphone/Charge Jack 3. Lock Tab 1 2 10 9 3 4 5 8 7 11 6 12 13 Printed in China Part No. 480-328-P Version B PRODUCT FEATURES Features · Two-Way Radio with up to a 5 km (3 mile) range · 8 Channels* · 38 CTCSS Privacy Codes · 83 DCS Privacy Codes · Backlit LCD Display · Battery Saver Circuitry · Maximum Range Extender · Call Alert (5 selectable tones) · Scan (Channel, Privacy Codes) · Vox Mode for Hands-Free Operation · Auto Squelch · Selectable On/Off "Roger Beep" Confirmation Tone · Key Lock · External Speaker/Microphone/Charge Jack · Belt Clip · Rapid Charger and Rechargeable Batteries *You are not allowed to use channels 1 and 2 in France. This situation can change; please contact the French radio licensing authority for more information. [. . . ] If CTCSS and OFF are flashing, press the CHANNEL UP or CHANNEL DOWN button to exit OFF and proceed to select a privacy code; or, if CTCSS and the small numbers next to the channel number are flashing, press the CHANNEL UP or CHANNEL DOWN button to select a privacy code. When your desired privacy code is displayed, choose one of the following: a. Press the MODE button to enter the new setting and proceed to other functions. Press the LOCK button to enter the new setting and return to LISTENING MODE. Do not press any buttons for 15 seconds to enter the new setting and return to LISTENING MODE. Mode Button CTCSS OFF Select Privacy Code Channel Buttons MODE FUNCTIONS OPERATION DCS Privacy Codes DCS (Digital Coded Squelch) is an advanced digital coding system allowing you to select one of 83 privacy codes to reduce incoming transmissions from other users on the channel. NOTE: If you are using a DCS code, both radios must be turned to the same channel and DCS privacy code to communicate. Each channel will remember the last code you selected. After selecting a channel, press and release the MODE button until the DCS icon flashes on the display. In addition to the DCS icon, either OFF or the small numbers next to the channel number will flash on the display. If DCS and OFF are flashing, press the CHANNEL UP or CHANNEL DOWN button to exit OFF and proceed to select a privacy code; or, if DCS and the small numbers next to the channel number are flashing, press the CHANNEL UP or CHANNEL DOWN button to select a privacy code. When your desired privacy code is displayed, choose one of the following: a. Press the MODE button to enter the new setting and proceed to other functions. Press the LOCK button to enter the new setting and return to LISTENING MODE. Do not press any buttons for 15 seconds to enter the new setting and return to LISTENING MODE. Mode Button Select VOX Channel Buttons Mode Button English DCS OFF Select Privacy Code Channel Buttons Voice Activated Transmit (VOX) In VOX Mode, your microTALK® radio can be used "hands-free, " automatically transmitting when you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise. To Turn VOX Mode On or Off: 1. Press the MODE button until the VOX icon flashes on the display. The current On or Off setting is displayed. Press the CHANNEL UP or CHANNEL DOWN button to turn VOX On or Off. When your desired VOX Mode setting is displayed, choose one of the following: a. Press the MODE button to enter the new setting and proceed to other functions. Press the LOCK button to enter the new setting and return to LISTENING MODE. Do not press any buttons for 15 seconds to enter the new setting and return to LISTENING MODE. MODE FUNCTIONS OPERATION Mode Button Select VOX Sensitivity Level Channel Buttons English To Set the VOX Sensitivity Level: 1. [. . . ] Press the MODE button until the letter "C" is displayed. The current call tone number will be flashing on the display next to the "C. " The current call tone will sound for one (1) second. Press CHANNEL UP or CHANNEL DOWN button to hear the other call tone settings. When you have selected a call tone choose one of the following: a. [. . . ]