User manual COBY CX-CD116

[. . . ] Do not attempt to disassemble, refer to qualified service personnel. Exposure to this invisible laser light beam may be harmful to the human eye. USE OF CONTROLS, OR ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER LIGHT BEAM EXPOSURE. INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO LASER BEAM. 2 LOCATION OF CONTROLS 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 43 44 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 16 17 18 19 20 21 22 23 24 25 26 1. [. . . ] Storage · For storage, be sure to return a disc to its case. · Do not expose discs to direct sunlight nor high temperature such as from a heater, high humidity and dusty places. Cleaning a disc Before operation, wipe off dust, dirt and fingerprints on the surface with a soft cloth. The disc should be cleaned from inward to outward. Correct Incorrect From the center to the edge · Never us thinner, nezine, analog record cleaner or anustatic spray. 8-cm (3-3/16") 'CD singles' #8-cm (3-3/16") compact disc can be used (without using AC adaptor) in this unit. 8 PLAYING CD 1. Push the POWER Button [5] to turn the unit on. The STANDBY INDICATOR [6] will light up. Press the CD Button [14] to "CD" mode. Press the OPEN/CLOSE Button [38] once to open the disc tray [42] and place CDs (label side facing up) on the disc tray, press DISC SKIP Button [39], the carousel rotates, so you can insert another CD. Then, press the OPEN/CLOSE Button [14] again, the CD disc tray [42] will be closed. If no disc was loaded on the selected carousel, "no disc" will appear on the display. OPEN/CLOSE FUNCTION Press the OPEN/CLOSE Button [38] to drive the disc tray [42] inwards or outwards. If the disc tray [42] is closed or closing then the current system mode. If the disc tray [42] is open or opening the disc tray is driven inwards. The system will remain in it's current mode, if in stop mode. The system will search through each location to find a disc, when a disc is found, the system will go straight into STOP mode. The total track numbers and total playing time will show on display for that disc. MAINTENANCE POWER SWITCH After using the unit, turn off the power by pressing the power switch. CLEAN THE HEADS To ensure the continued high performance of your unit, periodically clean the heads and pinch rollers to prevent accumulation of dust or tape oxide deposits. Failure to clean these parts may result in distortion of record sound, deterioration of reproduction or high frequencies, and inconsistent tape speed. Moisten a cotton bud with heads cleaner or methylated spirit and apply to the faces of heads, rubbing gently until all traces of dirt or oxide are removed. Also, clean the surfaces of the pinch of rollers and the capstans. Dry, clean and polish the face of the heads with piece of soft, lint-free cloth. Cassette Record/Playback Cotton Bud Capstan Cassette Playback Cotton Bud Capstan Erase Head Pinch Roller Play Head Pinch Roller Record/Play Head CLEAN THE UNIT To retain the beauty of the unit, simply wipe with a soft clean cloth moistened with plain lukewarm water. 10 TAPE OPERATION GENERAL INFORMATION ON CASSETTE TAPES · For playback, use normal (low-noise) tape for best sound. [. . . ] Button It has the same functions as the MEMORY/C-ADJ. · For clock setting, see item 2 and 4 of "CLOCK ADJUSTMENT". · For radio operation, see "PRESET STATION". · For CD operation, see "MEMORY PLAY". [. . . ]