User manual COBY TF-DVD7705

[. . . ] PORTABLE DVD PLAYER Operating Instructions Precautions Thank you for purchasing Portable DVD player. Please read this manual carefully before operating and reserve it for future reference. It will be helpful to you if you encounter any operational problem. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. [. . . ] The included AV cable or optical digital cable is connected here. 2 Volume control 3 Video in/out jack 4 Audio in/out and optical output jack 5 DC in Connect the included AC adapter here. Main unit right panel 1 Loader status indicator LED Indicate loader status. 2 Tray 3 Open hole When you insert the open-stick into this hole, the tray will slide out. Please turn off the unit before this operation. 1 2 3 1 2 -17- Parts and Functions Main unit rear side 1 Open-stick You can use it to open the tray. 2 Suppor t The unit can stand with this device. 1 1 How to stand 2 2 1 Pull out the support. 2 Draw out the support to a proper position . 3 Pull down the button to lock it. UNLOCK LOCK UNLOCK LOCK 1 2 3 Main unit bottom side 1 Hole for Batter y Pack 2 Nut for Batter y Pack 3 Batter y connector Note: 1 3 2 1 after Remember to insert back the rubber cover to using the battery pack. 3. BATTERY CONNECTOR -18- Parts and Functions Remote control unit (frequently used buttons) AUDIO SUBTITLE OPEN 1 SETUP ANGLE OSD SEARCH : Forward direction : Backward direction 4 PLAY/PAUSE button ( Use this button to play or pause playback. ( 2 3 4 5 PREV NEXT STOP REV PLAY/PAUSE FWD STEP/SLOW MENU TITLE CLEAR C ZOOM REPEAT A-B 6 2 7 3 8 5 MENU button Press this button to display the DVD's menu screen. ( 6 STOP button ( Press this button to stop playback. SHIFT 7 STEP/SLOW buttons( Press this button to slow playback at 1/2, 1/4, 1/6, 1/7 speed. If at pause status, press this button to playback step-by-step. ) 1 STANDBY button Press this button to turn on or off the power. 8 TITLE button Press this button to display the DVD's title. 2 PREVIOUS/NEXT button ( Use these buttons to search for the beginnings of tracks or chapters. : Backward direction : Forward direction and ( 3 Scan buttons ( and ( Use these buttons to switch playing speed of playing forward or backward. - 19 - Parts and Functions Remote control unit (other buttons) AUDIO SUBTITLE OPEN (Only for VCD, PBC on) 1 2 3 4 SETUP ANGLE OSD SEARCH 11 12 13 14 15 6 ZOOM Zoom the picture on screen. 7 Number buttons PREV NEXT STOP Press these buttons to input numbers. Pressing the SHIFT button to switch from function to number if necessary. 8 REPEAT button REV PLAY/PAUSE FWD STEP/SLOW 5 6 7 8 9 10 MENU TITLE CLEAR C ZOOM REPEAT A-B 16 For DVDs, use this button to play titles or chapters repeatedly. For CDs, use this button to play tracks or the entire disc repeatedly. 9 Press this button during playback to set two points and play the section between them repeatedly. Press the shift button to switch number & function. (Defaut: function) Open the tray and replace/take disk. Press it to switch the DVD's subtitle language. Press this button to display the disc information. A-B REPEAT button SHIFT 10 SHIFT button 11 OPEN 1 AUDIO button Press this button to switch the audio language. Press this button to display setup screen when at stop status. Press this button to display Video Enhance screen during playback. Use these buttons to move the cursor up, down, left and right when selecting setting items . 12 SUBTITLE button 2 SETUP button 13 OSD button 3 Cursor buttons 4 ENTER button 14 ANGLE button Press it to switch angle. Clear the numbers inputted before. 15 SEARCH button 16 CLEAR button Press it to enter/confirm setting item. Press it to return back the previous item. 5 RETURN button -20- Parts and Functions Names of battery parts and their functions 1 2 3 4 1 DC IN connector 2 Batter y knob 3 Connect the power adapter to recharge. Twist to tighten/detach the battery pack. When the battery is discharging, LED is off. When recharging the battery, LED is red. When the LED becomes green, means finishing recharge. Supply power to the player. Batter y indicator LED. 4 Player ter minals CAUTION: Do not short-circuit the terminals. -21- Connecting the Player to Other Devices Before connecting Turn off the power of the player and the devices to be connected. Connecting to a TV VIDEO IN AUDIO IN R L TV -22- Connecting the Player to Other Devices Connecting to a Dolby Digital / DTS / MPEG decoder or an amplifier with built-in decoder With this player, you can enjoy powerful Dolby Digital, DTS or MPEG sound. Output the digital signals from the player's digital output to a decoder or amplifier with built-in decoder. Main unit left panel DIGITAL IN -23- Connecting the Player to Other Devices Connecting to a digital amplifier that is not Dolby Digital / DTS / MPEG compatible Output the digital signals from the player's digital output to a digital amplifier that is not Doby/DTS/MPEG compatible. Main unit left panel Optical digital cable (not included) To digital audio input jack DIGITAL IN : Signal flow Notes: , Carefully check the player s digital output settings before connecting the player to an amplifier equipped with a digital audio input jack which is not Dolby Digital / DTS / MPEG compatible. Do not play DVDs when the audio settings are not correct. [. . . ] Check carefully for any exposed glue before using such discs. Do not use benzene, thinner or other volatile chemicals. Do not use record spray or antistatic spray either. We recommend using the separately sold cleaning set to clean discs. For tough dirt, apply some water to a soft cloth, wring out thoroughly , wipe off the dirt, then wipe the disc with a dry cloth. [. . . ]