User manual COBY TF-TV251

[. . . ] REFER ALL SERVICE QUERIES TO QUALIFIED PERSONNEL. DO NOT EXPOSE THIS RECEIVER TO RAIN OR MOISTURE. REMOVE MAIN PLUG FROM WALL SOCKET WHEN NOT IN USE. CARE SHOULD BE TAKEN WHEN REMOVING BACK CABINET FOR SERVICING; SUB CHASSIS MAY BE DAMAGED IF ALLOWED TO BECOME UNSUPPORTED. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Panorama : A 16:9 screen shown naturally as a 4:3 screen. Expansion : Expands a 4:3 screen sideways and shows only the center area. Caption Expansion : A 16:9 screen shown naturally as a 4:3 screen. 4: 3 : The screen size for video and current broadcast programs. 16 : 9 If you force a still picture or use the basic (4:3) screen over a long period of time, the LCD TV may show some residual images. These problems are not covered by the warranty. Use the native widescreen (16:9) mode whenever possible. 24 Capturing a Still screen ENGLISH You can pause a scene on the screen. Each press of the button will advance the scene one frame. Useful Tips Audio will continue to operate while the screen is paused. Pressing a channel number or input signal will automatically cancel the function. Digital Audio Output Settings You can select your digital audio output as <Dolby Digital> or <PCM>. 1 Press [MENU]. ] to move to <Sound>, then press [OK]. ] to move to <Digital Output>, then press [OK]. -The <Digital Output> Menu will appear. 2 Press [ 3 Press [ 4 Press [ ] to move to <Dolby digital> or <PCM>, then press [OK]. ] to move to <Sound>, then press [OK]. ] to move to <Auto Volume>, then press [OK]. -The <Auto Volume> Menu will appear. ] to move to <On> or <Off>, <then press [OK]. 2 Press [ 3 Press [ 4 Press [ 5 Press [EXIT] to exit the menu. 27 Sound (Digital Broadcasting) Settings Press [MTS] to listen to other languages. When English is set as the primary language, pressing [MTS] will change between <English>, <Spanish>, and <French> in this order. (Languages are only available when provided by a broadcasting station. ) When changing the channel, the set language will be selected. ] to move to <Sound>, then press [OK]. ] to move to <Multi-Track>, then press [OK]. -The <Multi-Track> Menu will appear. 1 2 Press [ 3 Press [ 4 Press [ ] to select <English>, <Spanish>, or <French>, then press [OK]. -The sound settings primarily set up the language. But in the menu, you can select your favorite language settings no matter what the broadcasting status. 5 Press [EXIT] to exit the menu. Sound (Analog Broadcasting) Settings Press [MTS]. [. . . ] Make sure the power cable is plugged in correctly, then press the power of the remote control. Check if external input mode is selected Press [external input selection] and select TV Try to use the "Fine Tune" channel adjustment. Avoid using cordless phones, hair dryers or electrical drills near the TV. Check if the channel has been selected correctly. [. . . ]