User manual COMET LABS GS8+

[. . . ] 5 Power LED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1000M LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 LINK/ACT LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Rear Panel Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The compact rigid desktop size was specifically designed for ROBO (Remote Office & Branch Office) and medium to large workgroups. The Switch can be installed where space is limited; moreover it provides smooth network migration and easy upgrade to network capacity. The 9" size can be rack-mount on 10" or 19" cabinet. Key Features l l l l l l l l l l l l l l Complies with the IEEE802. 3 Ethernet, IEEE802. 3u Fast Ethernet and IEEE 802. 3ab Gigabit Ethernet Standards Provides eight 10/100/1000Mbps Gigabit switching ports Performs full wire-speed switching with Head of Line (HOL) blocking prevention. Non-blocking & Non-head-of-line blocking full wire speed forwarding. Provides 4K MAC address entry Supports broadcast storm filtering. All ports provide Auto-Negotiation and Auto -MDI/ MDI-X functions Supports flow control: Back pressure for Half-duplex and IEEE 802. 3x for Full-duplex mode Status LED : Power per set and 1000M, Link/Activity Configurable to 10 full/half duplex, 100 full/half duplex and 1000 full/half duplex for each port 9" inch compact size, and can be rack-mount to 10" and 19" with bracket. -2- Chapter 2 Package Contents Before you start to install the Switch, please verify your package contain the following items: One 9" Gigabit Ethernet Switch One AC Power Cord One User's Manual Note: If any of these items is found missing or damaged, please contact your local supplier for replacement. -3- Chapter 3 Front Panel Layout I. 8 RJ-45 Gigabit Switch Ports There are 8 RJ-45 connectors on the front panel for connecting to servers, workstation or other devices. The Switch provides 8 10/100/1000Mbps switching ports that could sense the 10/100/1000M speed and negotiate Full/Half duplex mode automatically. These switching ports allow users to connect the Switch to 10Base-T, 100Base-TX and 1000Base-T devices. ?. LED Indicators of 8 Port Gigabit Switch LED Power 1000M Link/ ACT Color Yellow Yellow Yellow Status On On off On Flashing Description Power on Link 1000Mbps Link 10/100Mbps Link Data activating No. Of LED Power 8 (1~8) 8 (1~8) 8 (1~8) -4- III. LED Definitions Power LED On Off 1000M LED On Off ?The unit is powered on and ready for use. The port is operating at 1000Mbps speed. The port is operating at 10Mbps Half/ Full Duplex or 100Mbps Half/ Full Duplex speed ?The port is ready for 10/100/1000Mbps connection. The data is transmitted or received on the port. LINK/ACT LED On Flashing Rear Panel Layout ?AC input (90-240V/AC, 50-60Hz) UL Safety -5- Chapter 4 I. [. . . ] Filter/Forward Rate - 10Mbps ports ­ 14, 880pps - 100Mbps ports ­ 148, 800pps - 1000Mbps ports ­ 1, 488, 000pps 7. Buffer Memory - RAM: 3. 5Mb per device 8. MAC Address -Up to 4K MAC address entry per device 9. Power -AC input (90-240V/AC, 50-60Hz) UL Safety 10. [. . . ]