User manual COMET LABS NFPS2

[. . . ] Comet Labs NFPS2 / WFPS2 2 USB 2. 0 Hi-Speed-Port MFP Server User's Manual Version 1. 21 1 Table of Contents CHAPTER1 1. 1 1. 2 2. 1 2. 2 2. 2. 1 2. 3 2. 4 2. 4. 1 2. 4. 2 2. 5 3. 1 3. 2 3. 2. 1 3. 2. 2 3. 2. 3 3. 3 3. 3. 1 3. 3. 2 3. 3. 3 3. 3. 4 3. 3. 5 3. 3. 6 3. 3. 7 3. 3. 8 3. 4 3. 4. 1 3. 4. 2 3. 4. 3 4. 1 4. 2 4. 2. 1 4. 2. 2 4. 3 4. 4 4. 4. 1 4. 4. 2 4. 4. 3 4. 4. 4 4. 4. 5 4. 4. 6 4. 4. 7 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 About this Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Product CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This is known as a long file name using Unicode (UTF-16) encoding. - When do you need to configure codepage? The Server supports Windows codepages. If users want to communicate files using FTP client tool or SMB on Windows 98/Me/2000 with the Server, they have to set their Server codepage to be same as the codepage that their Windows PC is using. FTP SMB on Windows 98/Me/2000 - Configuring the Server's Codepages Users can use the following methods to set the Server's codepage. Start Control Center and Auto-searching Server window will appear. If the tool finds the Servers in your local area network, then you have to select one Server from the Server List. Double click the highlight list and enter the Server's administrator (default: admin) and password (default: admin). After you have logged in successfully, setting General Configuration dialog appears. 50 5. Select your codepage form File Server Codepage box and click Apply. Login your administrator (default: admin) and password (default: admin). After you have logged in successfully, setting General Configuration dialog appears. 51 4. Select your codepage form File Server Codepage box and click Apply. 6. 5 Adding Your USB Mass Storages to Network with Security You can use the following protocols to share your USB Mass Storages with user level security in network: SMB/CIFS: NetBIOS over TCP/IP FTP The protocols are shown in Supported Protocols box of the Control Center or the Server's web pages. 6. 5. 1 Setting up File Server Using the Control Center 1. Start the Control Center and Auto-searching Server window will appear. If the tool finds multiple Servers in your local area network, then you have to select one Server from the Server List. Double click the highlight list and enter the Server's administrator (default: admin) and password (default: admin). After you have logged in successfully, click Supported Protocols. 52 5. Set up File Server Configuration: A. Set SMB/CIFS Print/File Server Enable SMB/CIFS Print/File Server: select the item, if you want to support SMB/CIFS print/File server. Enable Internet Access: clear the item, if you do not allow that users can access your SMB/CIFS server via Internet. If you select the item, you allow Internet users can access your storage using the SMB/CIFS protocol. Enable Server Authentication: select the item, if you want to share your storage with user level security which requires user name and password to login. If you clear the item, your storage will be shared without security. B. Set FTP Server: Enable FTP Server: select the item, if you want to support FTP server. Maximum Session Number: select the item and fill in desired 53 number. [. . . ] Double click the selected Server and enter Administrator (default: admin) and Password (default: admin). Click Open to find your new firmware file and click Upgrade to start upgrading the firmware. Wait for 15 seconds for system reboot. Procedure B: Using the Server's Web Pages 1. Suppose that the Server is in DHCP mode. [. . . ]