User manual COMET LABS RF30

[. . . ] Model : RF30 User Manual V5. 0 User Manual v5. 0 1 / 203 RF30 User's Manual (Updated December 14, 2005) Copyright Information © 2005 Cometlabs Electric Corporation, Ltd. The contents of this publication may not be reproduced in whole or in part, transcribed, stored, translated, or transmitted in any form or any means, without the prior written consent of Cometlabs Electric Corporation. Published by Cometlabs Electric Corporation. All rights reserved. Cometlabs does not assume any liability arising out of the application of use of any products or software described herein. [. . . ] To disable this feature, simply select the Disable radio button and click Apply. User Manual v5. 0 107 / 203 4. 4. 4. 8 Email Alert The Email Alert function allows a log of security-related events (such as System Log and IPSec Log) to be sent to a specified email address. Email Alert: You may enable or disable this function by selecting the appropriate radio button. Recipient's Email Address: Enter the email address where you wish the alert logs to be sent. SMTP Mail Server: Enter your email account's outgoing mail server. It may be an IP address or a domain name. Alert via Email when: Select the frequency of each email update. Choose one of the five options: Immediately: The router will send an alert immediately. Hourly: The router will send an alert once every hour. Daily: The router will send an alert once a day. The exact time can be specified using the pull down menu. Weekly: The router will send an alert once a week. When log is full: The router will send an alert only when the log is full. User Manual v5. 0 108 / 203 4. 4. 5 Firewall The RF30 includes a full Stateful Packet Inspection (SPI) firewall for controlling Internet access from your LAN, and preventing attacks from hackers. Your router also acts as a "natural" Internet firewall when using Network Address Translation (NAT), as all PCs on your LAN will use private IP addresses that cannot be directly accessed from the Internet. Please see the WAN configuration section for more details. You can find three items under the Firewall section: Packet Filter, URL Filter, and Block WAN Request. User Manual v5. 0 109 / 203 4. 4. 5. 1 Packet Filter The Packet Filter function is used to limit user access to certain sites on the Internet or LAN. The Filter Table displays all current filter rules. If there is an entry in the Filter Table, you can click Edit to modify the setting of this entry, or click Delete to remove this entry. To create a new filter rule, click Create. Direction: Incoming Packet Filter rules prevent unauthorized computers or applications accessing your local network from the Internet. Outgoing Packet Filter rules prevent unauthorized computers or applications accessing the Internet. Select if the new filter rule is incoming or outgoing. Packet Type: Select the Transport protocol type (Any, TCP, UDP). Action When Matched: Select to Drop or Forward the packet specified in this filter entry. [. . . ] To do this, follow these steps: Step 1: Go to Configuration > WAN > ISP Settings. Configure your WAN1 ISP settings and click Apply. User Manual v5. 0 176 / 203 Step 2: Configure your WAN2 ISP settings and click Apply. + #4 &) K K$ + User Manual v5. 0 177 / 203 Step 4: Go to Configuration > Dual WAN > Outbound Load Balance. Choose the Load Balance mechanism you want and click Apply. Step 5: Complete. To check traffic statistics, go to Status > Traffic Statistics. Step 6: Click Save Config to save all changes to flash memory. User Manual v5. 0 178 / 203 H. 3 Inbound Fail Over Configuring your RF30 for Inbound Fail Over is a great way to ensure a more reliable connection for incoming requests. [. . . ]