User manual COMPAQ 3050 ALL-IN-ONE J610A INSTALLATION

[. . . ] wireless light: Signals if there is a wireless connection. The printer is wirelessly connected to a network when the blue light is steady on. To view different menus, make sure the printer display shows Setup before pressing the Quick Forms, Scan, or Wireless button. Attention light: Indicates that there is a paper jam, the printer is out of paper, or some event that requires your attention. [. . . ] If your printer is connected directly to your computer with a USB cable, make sure the cable connections are secure. Make sure the printer is set as your default printing device: · Make sure that your printer has a check mark in the circle next to it. If your printer is not selected as the default printer, right-click the printer icon and choose Set as Default Printer from the menu. If your printer is connected directly to your computer with a USB cable and you are still unable to print, or the Windows software installation fails: 1. Remove the CD from the computer's CD/DVD drive, and then disconnect the USB cable from the computer. Do not connect the USB cable until you are told to do so. Windows 7 is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. If your printer is connected to your computer with a USB cable, make sure the cable connections are secure. If you are still unable to print, uninstall and reinstall the software: Note: The uninstaller removes all of the HP software components that are specific to the device. The uninstaller does not remove components that are shared by other products or programs. Follow the on-screen and the printed setup instructions that came with the HP product. The product cannot be found during software installation If the HP software is unable to find your product on the network during software installation, try the following troubleshooting steps. If the printer has been idle, you may need to press the wireless button twice to display the wireless menu. If the printer is connected, you will see the IP address (for example, 192. If the printer in not connected, you will see Not Connected on the printer display. 2: If you determined in Step 1 that the product is not connected to a network and this is the first time you are installing the product, you will need to follow the on-screen instructions during software installation to connect the product to the network. Then when prompted, temporarily connect a USB cable between your network connected computer and printer to establish a connection. If the connection fails, follow the prompts to correct the problem, and then try again. When the setup is finished, you will be prompted to disconnect the USB cable and test the wireless network connection. Once the product connects successfully to the network, install the software on each computer that will use the product over the network. If the device is unable to join your network, check for these common issues: ⷠYou might have picked the wrong network or typed in your network name (SSID) incorrectly. Check and make sure that you enter the same SSID as the computer is using. [. . . ] The alert message may provide options to allow, permit or unblock. Also, if ther alert has a remember this action or create a rule for this selection, make sure and select it. This is how the firewall learns what can be trusted on your home network. Other network problems after software installation If the HP Deskjet has been successfully installed, and you are experiencing problems such as not being able to print, try the following: · Turn off the router, product, and computer, and then turn them back on in this order: router first, then the product, and finally the computer. [. . . ]