User manual COMPAQ CD-WRITER PLUS 9110I

[. . . ] HP CD-Writer Plus User's Guide English English Copyright 1999. Hewlett-Packard is a registered trademark of the Hewlett-Packard Company. registered trademarks of Microsoft Corporation. Names of products mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective company. 2 Laser Safety This unit employs a laser. [. . . ] WARNING: If you are just performing a test of your Disaster Recovery Set, the test is now complete. Please remove any diskettes and CDs from your drive(s) and restart your computer. The following message should appear: Select the volume that you wish to recover. Drive C: [Volume C Name] Drive D: [Volume D Name] NOTE: If you have only one drive, it will be automatically selected for recovery and this screen will not be displayed. Select the volume that you wish to recover by highlighting the volume using the Up and Down arrow keys, then pressing Enter. You will then be asked to confirm your selections before recovering your information. Press Enter to confirm your selections, or press Esc to return to the previous screen(s) and make a different selection. NOTE: If Disaster Recovery CD #1 is not in your HP CD-Writer Plus, you will be prompted to insert it at this time. HP Disaster Recovery will now begin recovering your system. The recovery process will take some time to complete, depending upon the amount of data you are recovering. You will be prompted to insert the CDs in the order they were created. Once the volume has been recovered, a summary of the process will be displayed. If there is more than one volume to be recovered, you may select it at this time. Recovering Your Data 25 After recovering the volume(s), you may wish to view the REPORT. TXT file which contains a text summary of the files that could not be recovered. If you wish to view this file, you must first exit the program by pressing Esc twice, then type EDIT REPORT. TXT. After reading the text, press Alt+F, then press X to exit the editor. For more information on files that could not be recovered, see "Files Not Recovered" on page 19. Remove any diskettes and CDs from your drive(s) and restart your computer. NOTE: It may be necessary to restart your computer more than once if any hardware in your system has changed since your DR Set was created. For Windows NT The Disaster Recovery process for Windows NT begins with a minimal install of the Windows NT Workstation, performed from the Disaster Recovery Set. HP Disaster Recovery screens will display messages instructing you when to insert the diskettes and CD(s) from your Disaster Recovery Set. Once the Setup portion of the minimal install has been completed, the Disaster Recovery Wizard will appear and guide you through the rest of the recovery process. You should first decide if another recovery method is possible. For example, if the problem appears to be associated with the Windows operating system, such as a corrupt registry, try to recover by following the steps outlined in your Microsoft Windows User's Manual before attempting the following procedures. [. . . ] Support is provided free of charge during warranty; your only cost is the long-distance charge. A per-incident charge applies after the warranty period. Canada (M-F, 8:00-20:00 Eastern Time) HP Customer Care in English and French 905-206-4663 Europe/Middle East/Africa (M-F, 8:30-18:00 Central European Time) Austria . 0180 52 58 143 Greece (M-F, CET + 1hr) . [. . . ]