User manual COMPAQ D7500 BASICS GUIDE

[. . . ] The information contained in this document is subject to change without notice. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of Hewlett-Packard, except as allowed under copyright laws. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. [. . . ] Insert the product CD-ROM into your computer's CD-ROM drive and then start the Setup program. NOTE: If you no longer have the installation CD, you can download the software from www. Follow the onscreen instructions and the instructions provided in the Start Here guide that came with the product. When the software installation is complete, the HP Digital Imaging Monitor icon appears in the Windows system tray. Use this section to solve any problems you might encounter while setting up the HP Photosmart hardware. Try the following solutions if there are no light indications, no noise, and no movement from the product when you turn it on. Solution 1: Make sure you use the power cord that came with the product solution · Make sure the power cord is firmly connected to both the product and the power adapter. Plug the power cord into a power outlet, surge protector, or power strip. ⷠIf you are using a power strip, make sure the power strip is turned on. Or, try plugging the product directly into a power outlet. ⷠTest the power outlet to make sure it is working. Plug in an appliance that you know works, and see if the appliance has power. If not, then there might be a problem with the power outlet. ⷠIf you plugged the product into a switched outlet, make sure the outlet is switched on. If it is switched to on but still does not work, then there might be a problem with the power outlet. Cause: The product was not being used with the power cord provided. If this did not solve the issue, try the next solution. Solution: Turn off the product, and then unplug the power cord. Plug the power cord back in, and then press the On button to turn on the product. cause: The product experienced an error. If this did not solve the issue, try the next solution. Make sure the power cord is firmly connected to the product and plugged into a power outlet. [. . . ] The CD/DVD holder is stuck in the storage area Solution: Pull the CD/DVD holder out as far as possible, until you feel resistance. Then, insert a flat blunt object (such as a butter knife or screwdriver) into the left corner of the storage slot and push down on the blue ring. With the blue ring pressed down, you should be able to pull the CD/DVD holder out of the storage slot. Cause: You inserted the CD/DVD holder back into the storage area with a CD/DVD loaded and the blue ring flipped over the disc. [. . . ]