User manual COMPAQ F2105

[. . . ] User's Guide HP f2105 LCD Monitor The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. HP assumes no responsibility for the use or reliability of its software on equipment that is not furnished by HP. [. . . ] View the "INF and ICM Readme" file (in English only). Select Install INF and ICM Files in the CD menu. After the files are installed, restart the PC. Ensure that the proper resolutions and refresh rates appear in the Display Control Panel settings. Refer to your Windows operating system documentation for more information. to install the monitor INF ICM You may needfrom the CD, digitally signedan installationorerror. files manually in the event of Refer to the "INF and ICM Readme" file on the CD for instructions (in English only). 4­2 User's Guide Operating the Monitor Downloading from the World Wide Web To download the latest version of INF and ICM files from the HP Support Web site: 1. Enter the model number for your monitor to go to the software download pages for your monitor. Download and install the INF and ICM files using the instructions in the download pages. Using the Auto-Adjustment Function You can easily optimize the screen performance for the VGA (analog) input by using the Auto/Select button on the monitor and the auto-adjustment pattern software utility on the CD provided. Do not use this procedure if your monitor is using a DVI input. If your monitor is using a VGA (analog) input, this procedure can correct the following image quality conditions: Fuzzy or unclear focus Ghosting, streaking, or shadowing effects Faint vertical bars Thin, horizontal scrolling lines An off-center picture User's Guide 4­3 Operating the Monitor To use the auto-adjustment feature: 1. Allow the monitor to warm up for 20 minutes before adjusting. Press the Auto/Select button on the monitor front panel. You can also press the Menu button, then select Auto-Adjustment from the OSD Main Menu. See "Adjusting Monitor Settings" in this chapter. If the result is not satisfactory, continue with the procedure. 3. The setup test pattern displays. Auto-adjustment setup test pattern 6. Press the Auto/Select button on the monitor front panel to produce a stable, centered image. 4­4 User's Guide Operating the Monitor Front-Panel Buttons The monitor buttons are located on the front panel. AB CDEF G Front-panel buttons Item A Label /­ (Vol down/minus) Function Decreases the volume level of the monitor speakers. Does not control volume of optional subwoofer or optional external speakers (sold separately). Increases the volume level of the monitor speakers. Does not control volume of optional subwoofer or optional external speakers (sold separately). (Also closes setting screens on OSD menu. ) OSD Inactive Opens OSD. B /+ (Vol up/plus) C Menu (Onscreen display) User's Guide 4­5 Operating the Monitor Item D Label /­ (VGA/minus) Function OSD Menu Active OSD Inactive Navigates down or Selects the VGA (analog) left browse, and video input. [. . . ] If you have questions about the type of power cord to use, contact your HP-authorized service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. B­6 User's Guide C Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ]