User manual COMPAQ L1619A

[. . . ] hp l1619a smart attachment module user's guide Smart Attachment Module 1 Notice This manual and any examples contained herein are provided "as is" and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard Company shall not be liable for any errors or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual or the examples herein. Consumer transactions in Australia and the United Kingdom: The above disclaimers and limitations shall not apply to consumer transactions in Australia and the United Kingdom and shall not affect the statutory rights of consumers. [. . . ] If you use HP Wireless Presenter-to-Go to create a mobile presentation, font information is included in the presentation. User's Guide 37 Presenting from a Memory Card Supported types of presentations PowerPoint presentation (PPT) If you install HP Wireless Presenter-to-Go, it embeds the required fonts on the memory card when you copy the presentation. See "To prepare a PowerPoint presentation" on page 39. If you install HP Wireless Presenter-to-Go Desktop software on your computer, you can create a mobile presentation (PDB file). See "To create mobile presentations" on page 40. All JPG, BMP, PNG files in the same folder are considered a picture presentation. Images are shown in alphanumeric order. Mobile presentation file (PDB) Pictures (JPG, BMP, PNG) Supported types of memory cards CompactFlash (CF) Secure Digital (SD) MultiMediaCard (MMC) Memory Stick (MS) USB Insert card in the CompactFlash slot in the accessory module. Requires an SD-to-CompactFlash adapter or SD-to-USB adapter. Requires an MMC-to-CompactFlash adapter or MMC-to-USB adapter. Requires an MS-to-CompactFlash adapter or MS-to-USB adapter. Insert the card in a USB port in the accessory module. 38 User's Guide Presenting from a Memory Card To prepare your computer You must install HP Wireless Presenter-to-Go software on your computer to support memory card presentations. Font support for PowerPoint files. To correctly display a PowerPoint presentation from a memory card, the required fonts should be available on the card. The font service ensures fonts are available for PowerPoint (PPT) files you copy onto the card. You can create special mobile presentation (PDB) files from PowerPoint presentations or other types of files. The HP Wireless Presenter-to-Go Desktop software creates these files. Install the software on a Windows 2000 or XP computer: 1. Click the option to install the software for mobile presentations. When you are prompted for a type of handheld organizer, you can leave the options deselected, or you can select an option if you want to install software for that type of handheld organizer (see "To prepare your handheld organizer for wireless presentations" on page 29). To prepare a PowerPoint presentation You can use Microsoft PowerPoint to create a memory card presentation. To store the PowerPoint presentation on a memory card, use one of these methods: Save the file on your computer. Then, in Windows Explorer, copy or drag the file onto the removable memory card. If you are prompted about embedding fonts on the memory card, allow the fonts to be embedded. Save the file directly on the memory card. Then, in Windows Explorer, right-click the file, select Embed Fonts, and allow the fonts to be embedded on your card. User's Guide 39 Presenting from a Memory Card For best results, follow these suggestions: Use standard or common fonts. Avoid special fonts that have restrictions against embedding. [. . . ] Do not open the projector except as instructed by the manual. To reduce the risk of fire or electrical shock, do not allow small metallic objects to get inside the projector. Carry the projector only in its protective case, and do not store paper clips or other small objects inside the case. Allow the projector to cool before removing any cover and touching internal components, as instructed by the manual. [. . . ]