User manual COMPAQ LASERJET M1319 MFP GETTING STARTED

[. . . ] Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. [. . . ] Any changes or modifications to the product that are not expressly approved by HP could void the user's authority to operate this equipment. Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules. for more regulatory information , see the electronic user guide. Hewlett-Packard shall not be liable for any direct, indirect, incidental, consequential, or other damage alleged in connection with the furnishing or use of this information. There are three sections in this guide: · Set up the fax hardware for copy and fax only Ce guide est divisé en trois sections : · 7 Install the paper tray, adjust the paper guides, and then load paper. 1 1 Connect the power cord, and then turn on the product. Press Cancel to return to the ready screen. When finished with this step, go to step 29. If you did not complete a recommended install, set time, date and fax header. Use the arrow buttons to select System setup, and then press OK. Use the arrow buttons to select Time/Date, and then press OK. Use the alphanumeric buttons to enter the current time. For the 12-hour clock, use the arrow buttons to move past the fourth character. Use two digits to specify the month, day, and year. [. . . ] When the recipient is ready, press Start Fax on the product control panel. Product Documentation The electronic User Guide is on the CD-ROM that came with the product or is in the HP program folder on your computer. [. . . ]