User manual COMPAQ MP1400

[. . . ] Notice © 2000 Compaq Computer Corporation. Compaq, the Compaq logo, and Deskpro are registered in the U. Microsoft, Windows, and Windows NT are registered trademarks and Visual C++ is a trademark of Microsoft Corporation in the United States and/or other countries. All other product names mentioned herein may be trademarks or registered trademarks of their respective companies. [. . . ] Release the buttons on the sides of the optional Multimedia Adapter to complete the connection. When the adapter is activated, one of the LEDs 4 on the Multimedia Adapter turns green. MP1400 Microportable Projector 3-3 Connecting a Camcorder, VCR, or DVD Player to the Optional Multimedia Adapter A rubber boot cover protects the DFP (digital) connector on the projector. Be sure to remove the cover before connecting the Multimedia Adapter to the projector and replace the cover when the projector is not in use to prevent electrostatic discharges from damaging the connector. Use an RCA cable to connect a VCR to the video connector 1 on the optional Multimedia Adapter. Use an S-video cable to connect a camcorder or DVD player to the S-video connector 2 on the optional Multimedia Adapter. Connect one end of the power cord 3 into the back of the projector and the other end to an electrical outlet that is easily accessible and close to the projector. To connect the multimedia adapter speaker for sound, connect the RCA audio cable 4 to the audioin port on the optional Multimedia Adapter and the audio-out port on the VCR, camcorder, or DVD player. If you are not using the speaker at this time, skip to the next step. 3-4 MP1400 Microportable Projector 4. Press the Source button 5 on the Multimedia Adapter to toggle and select between the connected input sources. The optional Compaq Multimedia Adapter can remain attached to the projector, or it can be removed and stored in the carrying case. MP1400 Microportable Projector 3-5 Connecting a Video Player a round, one-prong composite video If your video player usesvideo cable. If your video player uses connector, use the RCA a round, four-prong S-video connector, use the S-video cable. Both cables are included with the optional Compaq Multimedia Adapter. Plug the RCA video cable into the video-out port on the video player and the video port on the video adapter. If you are using the S-video cable, connect it to the S-video out connector on the video player and the S-video port on the video adapter. Turn on the projector first, then the video player. Push the Source button on the back of the multimedia adapter to toggle and switch the projector signal from data (computer icon) to video (TV icon). The data mode receives computer inputs, and the video mode receives video input such as a TV tuner, VCR, video, or camera. With the optional Compaq Multimedia Adapter attached, the projector is compatible with major video standards such as NTSC, PAL, and SECAM. Use the on-screen menu to adjust the video performance manually, or press the Resync button on the projector panel to optimize it automatically. Video On-Screen Menu Adjustments When the optional Multimedia Adapter is attached to the projector and the video source is selected, an alternate video on-screen menu can be displayed on the projected screen. This menu includes some selections that are relevant to the multimedia functions of the video adapter. Attach the optional Compaq Multimedia Adapter to the projector. 3-6 2. Attach a video source to the projector. MP1400 Microportable Projector 3. Set the Source button on the optional multimedia adapter or optional remote control to video. [. . . ] Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product. Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. B-2 Agency Regulatory Notices European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European norms: s s EN55022 (CISPR 22) - Radio Frequency Interference EN50082-1 (IEC801-2, IEC801-3, IEC801-4) Electromagnetic Immunity EN60950 (IEC950) - Product Safety s Japanese Notice Agency Regulatory Notices B-3 Specifications Compaq MP1400 Microportable Projector Projection Panel Lamp Type Image Size Avg. Lamp Life in Hours Projection Distance Maximum Weight (Unpacked) Maximum Dimensions W×H×D 3 in × 8 in × 9 3/8 in Maximum Graphics Resolution 1024 × 768 compression Displayable Colors 16. 7 million colors Horizontal Frequencies Analog signals 15 - 69 kHz Digital signals 15 - 60 kHz Vertical Frequencies Analog signals 48 - 85 Hz Digital signals 48 - 75 Hz Required Environmental Temperatures for the Following Altitudes: Sea Level Operating Temperature Storage Temperature 2, 500 - 5, 000 Feet Operating Temperature Storage Temperature 5, 000 - 10, 000 Feet Operating Temperature Storage Temperature Humidity (Non-Condensing) Operating Non-Operating Power Source Power Consumption Input Terminal 50 to 104°F -22 to 149°F 50 to 95°F -22 to 149°F 50 to 82°F -22 to 149°F 10 to 40°C -40 to 65°C 10 to 35°C -40 to 65°C 10 to 28°C -40 to 65°C SVGA 800 × 600 × 1 120 watt High Brightness Lamp See the Image Size Adjustment table. 1, 500 hours 3. 3 feet - 35. 64 feet 4. 2 lbs (without cables) 1 meter - 10. 8 meters 1. 9 kg 20 to 80% 5 to 95% 90 - 265 VAC, 50-60 Hz < 185 watts One 15-pin D-type connector with one cable included One Digital FP connector with one cable included B-4 Agency Regulatory Notices Preset Display Resolutions Table This projector automatically recognizes the preset display resolutions listed in the following table. Display Resolutions Preset Modes 1. [. . . ]