User manual COMPAQ MP2800

[. . . ] Notice 2000 Compaq Computer Corporation. COMPAQ and the Compaq logo Registered in U. S. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries. All other product names mentioned herein may be trademarks or registered trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein. [. . . ] In this case, the projector displays the image at the standard 4:3 aspect ratio, just as it would any other computer graphics mode. The projector processes the data as it comes from the computer. The largest display mode available using the DVI interface is 1280 x 1024 at 75 Hz. The largest display mode available using the VGA interface is 1280 x 1024 at 75 Hz. When displaying HDTV content in a window as part of your desktop environment, it is recommended to project it in the computer's native 4:3 mode since the computer has already embedded the HDTV video stream in widescreen format within the window. To do so, you may need to select the Fill to Screen mode on your projector to preserve the height-to-width relationship of the material. Regardless of the source, the HDTV formats are generally of higher resolution than that of the projector (XGA, or 1024 x 768). Therefore, the projector will normally downscale the HDTV data to fit the complete image within the displayable 1024 x 768 resolution. Using the Projector 31 Chapter 3 Using the Compaq Multimedia Adapter The Compaq Multimedia Adapter (optional use) is specifically designed to fit the Compaq Microportable Projector. This adapter enables signals from camcorders, DVD players, or videocassette recorders to be shown through the projector. To connect the projector to an external camcorder, stand-alone DVD player, or videocassette recorder, you need to connect the Compaq Multimedia Adapter to the projector. Identifying the Multimedia Adapter Components Using the Compaq Multimedia Adapter 32 Item Component Infrared Receiver Volume + Video LED S-Video port 8-pin connector Release buttons Speaker Volume - Source button Computer LED Video/RCA port Audio-in jack Function Interprets signals received from the remote control Increases volume When lit, indicates video input Connects camcorders or DVD players Connects back to the computer allowing remote mouse functionality Use to release adapter from projector Provides audio performance Decreases volume Selects between all sources When lit, indicates computer input Connects video equipment Connects audio equipment, videocassette recorders, and DVD players, allowing sound to be played. Using the Compaq Multimedia Adapter 33 Attaching the Multimedia Adapter to the Microportable Projector 1. Insert the hook on top of the Multimedia Adapter into the upper slot on the projector by inserting and pushing upward. Using the Compaq Multimedia Adapter When the adapter is activated, one of the LEDs the Multimedia Adapter turns green. 2. Insert the adapter plug into the digital connector of the projector. on the back on 34 Connecting a Camcorder, Videocassette Recorder, or DVD Player to the Compaq Multimedia Adapter 1. Use an RCA cable to connect a videocassette recorder to the video connector on the Multimedia Adapter. To play audio through the Multimedia Adapter, connect an audio cable to the source audio-out jack and the audio-in jack on the Multimedia Adapter . Use an S-video cable to connect a camcorder or DVD player to the S-video connector on the Multimedia Adapter. Connect one end of the power cord into the back of the projector and the other end to an electrical outlet that is easily accessible and close to the projector. Press the Source button on the Multimedia Adapter to select different input sources. The Compaq Multimedia Adapter can remain attached to the projector, or it can be removed and stored in the carrying case. Using the Compaq Multimedia Adapter 35 Connecting a Video Player If your video player uses a round, one-prong composite video connector, use the RCA video cable. If your video player uses a round, four-prong S-video connector, use the S-video cable. Both cables are included with the Compaq Multimedia Adapter. 1. Plug the RCA video cable into the video-out port on the video player and the video port on the video adapter. If you are using the S-video cable, connect it to the S-video out connector on the video player and the S-video port on the video adapter. Turn on the projector first, then the video player. [. . . ] Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions regarding your product, contact: Compaq Computer Corporation P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800-652-6672 (1-800-OK COMPAQ) For questions regarding this FCC declaration, contact: Compaq Computer Corporation P. O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product. Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Agency Regulatory Notices 55 European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. [. . . ]