User manual COMPAQ PHOTOSMART E317 QUICK START GUIDE

[. . . ] To turn the camera on, slide the lens cover open until it clicks, uncovering the lens. The Power/Memory light on the back of the camera turns on solid green. the HP logo also displays on the Image Display as the camera powers up. CAUTION: When sliding the lens cover, keep your fingers clear of the lens. [. . . ] Insert the memory card in the small slot behind the batteries, with the notched side of the card going in first, as shown. Make sure the memory card snaps into place. Close the Battery/Memory card door and turn on the camera. To help prevent corrupted cards and images, you should format memory cards before you use them for the first time. Press the button, then use the button to move to the Playback Menu . Use the button to highlight Format Card, and then press the button to display the Format Card confirmation screen. Appears in the Image Display while the camera is formatting the memory card. when the camera has completed the formatting , the Total Images Summary screen is displayed. To remove the memory card from the camera, first turn the camera off. Then open the Battery/Memory card door, press down on the top edge of the memory card, and it will spring outward from the slot. Press the Live View/Playback button until the Live View icon appears in the upper left corner of the Image Display, then frame the subject for your picture in the Image Display. Press the Shutter button all the way down to take the picture. TIP: Hold the camera with both hands when pressing the Shutter button to reduce camera shake and prevent blurry pictures. Press the Live View/Playback button until the Live View icon appears in the upper left corner of the Image Display, then frame the subject for your picture in the Image Display. To stop recording video, press and release the Video button again; otherwise, the video will continue recording until the camera runs out of memory. You will use Playback to review images and video clips. Press the Live View/Playback button until the Playback icon appears in the upper left corner of the Image Display. Use the buttons to scroll through your images and video clips. Video clips play automatically after the first frame of the video clip displays for 2 seconds. The HP Image Zone software allows you to transfer images from the camera, and then view, edit, print, or e-mail them. [. . . ] When the HP Image Zone software has finished installing, re-enable the virus protection software that you disabled in Step 1. Turn off the camera, then connect the camera to the computer through the USB cable provided. Follow the on-screen instructions to have the software transfer the images from the camera to the computer. Your camera has many more valuable features that are covered in detail in the User's Manual. [. . . ]