User manual COMPAQ USB NETWORK PRINT ADAPTER

[. . . ] The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Contents 1 Welcome Contents of the package . 5 Lights and ports of the print adapter . 7 Install the Network Print Adapter software . [. . . ] Insert the printer software CD or start the downloaded driver installation. When the software asks you to plug in the USB cable, do the following: a. Right-click the Connection Manager icon in the system tray (lower-right corner of your screen). b. Select Connect. After a few moments, the icon will change to show a successful connection. Connect to the printer using Connection Manager If you already have the printer software installed on this computer follow these instructions. Right-click the Connection Manager icon in the system tray (lower-right corner of your screen). 2. Click Connect. After a few moments, the icon will change to show a successful connection. 8 Basic setup 3 Using the USB Network Print Adapter For most everyday tasks, you will use your printer or all-in-one device just like you always have. Occasionally you may want to use the Connection Manager or Advanced Setup utility. Use the Connection Manager You can use the Connection Manager icon in the System Tray (lower-right corner of your screen) to perform the following tasks. · · · · Check the status. Connect or Disconnect. Connection Manager icons The Connection Manager has a number of icons to tell you the status of the Network Print Adapter. The three common ones are described below. The printer or all-in-one device is connected and ready to use. To manually reconnect, right-click the icon and select Connect. The Network Print Adapter cannot detect the printer. Check to see if all cables are connected between the adapter and printer and that both plugged in and have power. Cancel a print job Use the Print Queue to cancel or pause a print job. If you get a message that the print job has failed, you should cancel the job to delete it from the print queue. Right-click the Connection Manager icon and select Print Queue. Right-click the print job in the Print Manager and select Cancel. Change printers If you have more than one printer using a USB Network Print Adapter on your network, you can change the printer that your computer is connected to. Right-click the Connection Manager icon and select Select Printer. . . Select a different printer and click Select. Restart the Connection Manager If the icon does not appear in the system tray, you need to restart the Connection Manager. Go to Start --> All Programs --> HP USB Network Print Adapter--> Restart connection manager. Use the Connection Manager 9 Using the USB Network Print Adapter The Network Print Adapter can detect the printer or all-in-one but it is not currently connected. The device will be automatically reconnected if a print job is sent. Check the online help for the HP Director or the HP Solution center for instructions on selecting the printer. Cause This is a known problem with some older HP drivers for All-in-Ones. Solution If you are not having problems printing, we recommend that you use Windows or other applications for scanning and reading memory cards. Under Name you will see listings for the scanner and memory card slots (if your device has them). [. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For further information, contact: Manager of Corporate Product Regulations Hewlett-Packard Company 3000 Hanover Street Palo Alto, Ca 94304 (650) 857-1501 FCC statement 15 Technical information European Union Regulatory Notice Products bearing the CE marking comply with the following EU Directives: · · · Low Voltage Directive 73/23/EEC EMC Directive 89/336/EEC CE compliance of this product is valid only if powered with the correct CE-marked AC adapter provided by HP. If this product has telecommunications functionality, it also complies with the essential requirements of the following EU Directive: R&TTE Directive 1999/5/EC Compliance with these directives implies conformity to harmonized European standards (European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family. This compliance is indicated by the following conformity marking placed on the product. Notice to users in Korea Notice to users in Japan 16 Technical information Declaration of Conformity DECLARATION OF CONFORMITY according to ISO/IEC 17050-1 and EN 17050-1 DoC #: SDCAB-0706-1 Supplier's Name: Supplier's Address: Hewlett-Packard Company 8000 Foothills Blvd. [. . . ]