User manual COMPRO E650F START UP GUIDE

[. . . ] VideoMate Vista E650F Hybrid D/A PCIe Tuner Card Start Up Guide Compro Technology, Inc. www. comprousa. com Table of Contents VideoMate Vista E650F PCIe Tuner Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 VideoMate Vista E650F Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 VideoMate Vista E650F Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You can change detail settings of ComproDTV 4 here. TV Settings This option gives you the way to manually set the method of scanning TV programs. Select your choice here or use default channel table to do the scanning. Autoscan The first time you start ComproDTV 4, Autoscan will automatically scan for available TV channels for TV signals. Please select your TV source from analog cable/antenna or from digital antenna. You can rescan the channels at any time by pressing the Autoscan button. When Autoscan is finished, detected channels are automatically enabled 21 . Channels, where a valid signal and marked with the green check mark could not be detected, are disabled and marked with a blank. However, you can interrupt the scanning process by pressing the Stop button. After you are finished scanning for available channels, you may select OK to return to the display window, or customize the channel list according to your preferences, as described below. Channel Naming You can customize the channel names by double-click on the Description field of the channel you wish to rename. You can do more changes on the channel's property by right-click the mouse on the Description field of the channel you wish to edit. Custom Settings for each channel You can customize each channel properties by click the icon in "Custom Settings" filed and edit it. Using my favorite channel list You can click to select using my favorite channel list from option window. And exit the list by yourselves to makes channel switch more convenient. 22 Channel Surfing While watching TV, the channel surfing feature displays a 4x4 grid of channel images to give you an overview of available programming. Double click the channel screen can direct jump to the channel you want. PIP/POP mode Usually, digital TV station broadcasts multiple programs on one frequency. Therefore, ComproDTV 4 in Vista E650F TV card supports up to 1 main DVB-T channel windows, 3 sub channel windows, and playback recorded video file at the same time if available. Or watch 1 live analog TV show and playback recorded video file at once. You can press the Add/Reduce Window button to open a slave window for that. Main window has all features while slave window has limited functions only. Double-click on the slave window can switch the TV program to the main window. Alignment Window button will put slave window(s) into main window which is convenient for you to watch multiple programs on full screen mode. The buttons on the upper-left corner slave window are Channel Up, Channel Down, Mute, Windows Alignment, and Close respectively. Slave window can be resized by mouse dragging lower-left corner to any ratio. Advanced Multiple Video Display Mode ComproDTV 4 also supports 2 or above Compro products connect and watch it at the same time. If you have more than one Compro analog or digital TV cards and USB TV box, you can use it to watch the live TV from different devices. When Starting PIP mode, there will be two option for you to choose; 1. "Digital Sub Window" If any one of connected products have digital TV feature. [. . . ] The IR icon should turn bright when you press buttons on the remote. If you see no response, please move your mouse cursor on the IR icon. If you see it shows "No Device, " your drivers may not be not properly installed. Please remove ComproDTV 4 using "Add/Remove programs" in the Control Panel and reinstall it. [. . . ]