User manual COMPRO V300 START UP GUIDE

[. . . ] 2 VideoMate V300 TV Box Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 VideoMate V300 TV Box Hardware Guide. . . . . . . . . . . . . . . . . . . . . . . . 4 Remote Control Key Definition and Use . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 VideoMate V300 TV Box Using Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you have connect V300 TV box to your computer's video card, press the power button on the TV box or the power button on the remote control will switch between TV and PC signal. You may also press "TV/PC" button on the remote control to achieve the same result. Order of the Sources: TV > Composite > S-Video > Component > TV VideoMate V300 TV Box supports 9 resolutions from below. Resolution 1 -> 640*480 (4:3) Resolution 2 -> 800*600 (4:3) Resolution 3 -> 1024*768 (4:3) Resolution 4 -> 1280*720 (16:9) Resolution 5 -> 1280*1024 (5:4) Resolution 6 -> 1400*1050 (4:3) Resolution 7 -> 1440*900 (16:10) Resolution 8 -> 1600*1200 (4:3) Resolution 9 -> 1680*1050 (16:10) To change resolution, please open up menu and select the resolution you want. Refer to later instruction for more detail. "RES" button from the remote controller can also switch the resolution. If using PIP feature, the refresh rates in Windows support resolutions below: Resolution 640 x 480 800 x 600 1024 x 768 1152 x 864 1280 x 1024 1280 x 720 1440 x 900 1400 x 1050 1600 x 1200 1680 x 1050 60 Hz Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Support Refresh Rate 70 Hz 72 Hz Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 75 Hz Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 6 VideoMate V300 includes the special base holder with video/audio input to provide S-video, composite video, stereo audio, and component (Y, Pb, Pr) video input. You can easy connect the TV box with DVD player, VCR, DV, or Xbox/Wii/PS 3 game consoles to watch DVD movies or play games on your monitor. When using Component input, the format will be automatically detected by VideoMate V300; you do not need to select between 480i, 480p, 576p, 720p, or 1080i. The Component input that VideoMate V300 supports are the following: SDTV480i, 576i HDTV480p @ 60Hz, 576p @ 50Hz, 720p @ 60Hz, 1080i @ 60Hz Note: This is the refresh rate of your input device, is not the refresh rate of your monitor. OSD Menu Guide Menu button will open up OSD Menu, please use the direction key to navigate. (Picture) Brightness Contrast Saturation Sharpness Hue OptiColor Mode (TV) (Monitor) (OSD) Default : 50 Default : 50 Default : 50 Default : 0 (Sound) Adjust the brightness (0~100) Adjust the Contrast (0~100) Adjust the Saturation (0~100) Adjust the Sharpness (0~15) Adjust the Hue ( 0~100) Default : 50 3 presets modes and 5 custom modes of picture settings. (Picture) Input Signal Channel Rename Fine tune Auto Scan Channel Swap CH Add/Erase Channel Video System (TV) (Monitor) (OSD) (Sound) Select Air or Cable for TV input signal type. Default is Air Set a name for specific channel. (5 letter/numbers) Fine tune frequency if TV is unclear. (0~100) default is 50 Recommend to use Auto Scan for the first time. (NO/YES) Swap the channel numbers to your preference. Change video standard for current channel. PAL (B/G, D/K, I) SECAM (B/G, D/K) 7 (Picture) Resolution Refresh Rate Noise Reduction OptiRatio Display Type Input Source (TV) (Monitor) (OSD) (Sound) 640*480 800*600 1024*768 (default) 1280*720 1280*1024 1400*1050 1440*900 1600*1200 1680*1050 60Hz (default) 75Hz Adjust level of noise reduction. (0~8) Default is 4 4:3 16:9 SmartZoom Panorama Full LCD (default) CRT PDP TV Composite SV (S-Video) YPbPr (Component) PC (Picture) (TV) (Monitor) (OSD) (Sound) OSD Position Press OK key, use direction keys to move OSD position OSDTransparency 1 2 3 4 Language Select your language (Default language is Russian) Information VideoMate V300 Version information Reset All Settings NO/YES (1 Cancel / 2 Reset All Settings) Country/Region Select your country or region (Picture) Volume Treble Bass Dynamic Bass Boost Stereo Effect SAP Mode Reset (TV) (Monitor) (OSD) (Sound) Adjust volume (0-50) Adjust Treble volume (0-15) Adjust Bass volume (0-15) ON/OFF (Default is OFF) Adjust Stereo Effect (0~8) Default : 0 ON/OFF (Default is OFF) Reset sound settings (NO/YES) Channel Swap To swap the channel numbers, please select Channel Swap from the menu then select yes, and it will show as a sub menu. Once you have entered this menu, you will see a list of channels. You may browse with the direction keys; Up and Down are going through the list while Left and Right are changing pages of the list. Select the channel number that you wish to swap and press 8 OK, and then enter the number of the channel that you wish to switch. To reset to the original channel numbers, please rescan the channel table again by selecting Auto Scan in the menu. My Favorite Channel List My Favorite Channel List can store up to 10 channels that you watch the most and browse with "FAV UP" and "FAV DOWN" keys on the remote controller. [. . . ] You may refer to the OSD Menu Guide above for exact location. SAP Mode SAP Mode is a function that will allow you to broadcast Main Audio Channel in the left and Sub Audio Channel in the right. To activate this function, please press the MENU button and select Sound section, then select ON with the option of SAP Mode. For more information, please refer to page 4 for detail description. If your display card of your computer has both DVI and VGA connected, please make sure the settings in Windows is set to VGA output. [. . . ]