User manual COMPRO W700F START UP GUIDE

[. . . ] Compro, VideoMate, Poladyne, Play with Power, and the Compro logo are trademarks of Compro Technology, Inc. Other names and marks are trademarks of their respective owners. COMPRO makes no warranties with respect to this documentation and disclaims any implied warranties of merchantability, quality, or fitness for any particular purpose. The information in this document is subject to change without notice. [. . . ] The default TV settings will be your local country and TV system, and you can change it from OSD menu later. Now you may enjoy the TV shows on your monitor. If you have connect W700F TV box to your computer's video card, press the power button on the TV box to switch between TV and PC signal. Order of the Sources: Analog TV FM Composite video S-Video Conponent video Analog TV . . . VideoMate W700F TV Box supports 60 and 75 Hz with 9 resolutions from below. Resolution 1 -> 800*600 (4:3) Resolution 2 -> 1024*768 (4:3) Resolution 3 -> 1280*1024 (5:4) Resolution 4 -> 1400*1050 (4:3) Resolution 5 -> 1440*900 (16:10) Resolution 6 -> 1600*1200 (4:3) Resolution 7 -> 1680*1050 (16:10) Resolution 8 -> 1920*1080 (16:9) Resolution 9 -> 1920*1200 (16:10) To change resolution, please open up menu and select the resolution you want. Refer to later instruction for more detail. "Resolution" button from the remote controller can also switch the resolution. If using PIP feature, the refresh rates in Windows support resolutions below: Resolution 800 x 600 1024 x 768 1280 x 1024 1440 x 900 1400 x 1050 1600 x 1200 1680 x 1050 1920 x 1080 1920 x 1200 Support Refresh Rate 60 Hz 75 Hz Yes Yes Yes Yes Yes No Yes No Yes No Yes No Yes No No No No No OSD Menu Guide (Analog TV and FM Radio) Menu button will open up OSD Menu, please use the direction key to navigate. Picture Brightness Contrast Saturation Hue Sharpness OptiMode Adjust the brightness (0~100) Adjust the Contrast (0~100) Adjust the Saturation (0~100) Adjust the Hue ( 0~100) Adjust the Sharpness (0~15) 3 preset modes (Standard/TV, Game, and Cinema) and 5 custom modes of picture settings. You can adjust the color settings then save it in custom mode. TV Function Input Signal Select Air or Cable for TV input signal type. Recommend to use Auto Scan for the first time. (NO/YES) Fine tune frequency if TV is unclear. (0~100) default is 50 Channel Rename Set a name for specific channel. (5 letter/numbers) Auto Scan Finetune Custom Channel CH. . . . . . . . Add and edit your custom channel Resolution Resolution Swtich resolution: 800x600 1024x768 (default) 1280x1024 1440x1050 1400x900 1680x1050 1600x1200 1920x1080 1920 x1200 Adjust level of noise reduction. (0~8) 4:3 16:9 SmartZoom Default is 4 Full Panorama Noise Reduction OptiRatio Input Source Analog TV, Component, Composite, S-Video, FM Position Finetune Use right and left direction key to adjust the position of screen OSD Settings Country/Region Select your country or region 10 Language OSD Position Information Reset all settings Select your language (Default is your local country) YES/NO (Default is NO) VideoMate W700F Version information NO/YES (1 Cancel / 2 Reset All Settings) OSD Transparency 0-100 Audio Settings Volume Treble Bass Dynamic Bass Boost Stereo Effect Reset Adjust volume (0-100) Adjust Treble volume (0-15) Adjust Bass volume (0-15) YES/NO (Default is NO) Adjust Stereo Effect (0~8) Default : 0 Reset sound settings (YES/NO) FM Mode: While listen to FM radio, this OSD page will different with TV mode. FM Station List CH 1 CH 2 . . . . . . . . . . List all the available FM channel and frequency FM Station Scan Auto Scan Add Channel Delete Channel Reset all Auto scan the available FM channel Add FM channel by directly frequency input Delete FM channel NO/YES (1 Cancel / 2 Reset All Settings) Channel Swap To swap the channel numbers, please select Channel Swap from the menu then select YES, and it will show as a sub menu. Once you have entered this menu, you will see a list of channels. You may browse with the direction keys; Up and Down are going through the list while Left and Right are changing pages of the list. Select the channel number that you wish to swap and press OK, and then enter the number of the channel that you wish to switch. To reset to the original channel numbers, please rescan the channel table again by selecting Auto Scan in the menu. My Favorite Channel List My favorite channel list can store up to 10 channels that you watch the most and browse with "Fav. To add channels to the favorite list, please turn to the channel you wish to add and press "Set Fav" on the remote control. [. . . ] You may refer to the OSD Menu Guide above for exact location. SAP Mode (Only appears in PAL/SECAM TV system area) SAP Mode is a function that will allow you to broadcast Main Audio Channel in the left and Sub Audio Channel in the right. To activate this function, please press the MENU button and select Sound section, then select ON with the option of SAP Mode. Switch to the channel that contains both Main and Sub Audio Channel, and then change the stereo mode to SAP by pressing SAP button on the remote controller. Troubleshooting Installation The most common cause of the problem is the incorrect connection of the cables. Also make sure computer grounding is good. Why PIP does not work? Please make sure you have connected your computer VGA to W700F and connect W700F to the monitor. [. . . ]