User manual COMPX C2174-70-DC-KD

[. . . ] While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. The most up-to-date drivers and manuals are available from: http://www. okiprintingsolutions. com 45360402EE Rev1; Copyright © 2012 Oki Europe Ltd. COMPX is a registered trademark of Oki Electric Industry Co. , Ltd. Oki Printing Solutions is a registered trademark of Oki Data Corporation. [. . . ] 8. Set up the printer driver by designating the output destination to Local Printer (LPT1:). For information on setting up your printer driver, see the Printing Guide. Insert the CD-ROM into the CD-ROM drive. If it does not start, double-click setup. exe on the CD-ROM. Click Next when the Welcome screen is displayed. Verify Destination Folder and Spool Folder and click Next. Check Register in Startup if you want automatic startup as Windows boots up. Check Launch as minimized if you want to startup in the Icon state and click Next. Verify the program folder name and click Next. When the installation ends, the Setup complete screen is displayed. Check Yes, I want to launch Oki LPR Utility now and click Finish. Locally connected printers > USB port > Parallel port (if available) 2. Networked printers > Directly connected (peer-to-peer) printers via TCP/IP The Microsoft standard TCP/IP is installed and configured to use Port 9100 with the printer’s IP address. > Printers not directly connected, but shared via a PC (Client Server) Why use the Oki Driver Installer?> > > > Automatically discovers printers on the Network (TCP/IP) Installs driver and correctly assigns the appropriate port and IP address Allows easy configuration and sharing of the printer with other Network users Automatically configures the printer driver with the appropriate hardware device options such as, additional paper trays, etc. (via the Oki Network Extension software) Printing from windows > 31 USING THE ADD PRINTER WIZARD Method summary: The following table shows the different ways to connect to the printer (port types). WINDOWS 2000 Windows standard TCP/IP Oki LPR IPP NetBEUI YES YES YES YES WINDOWS XP YES YES YES YES WINDOWS VISTA YES YES YES NO WINDOWS 7 YES YES YES NO About the different methods Windows standard TCP/IP port The standard TCP/IP port simplifies connecting to remote printers using the TCP/IP protocol. A computer that acts as a print server must run the TCP/IP protocol in order to print. Can be configured to use either LPR or RAW (e. g. OkiLPR Used to connect your printer over TCP/IP using an LPR port. OkiLPR also includes useful tools enabling you to download PS and PRN files directly to your printer and automatically redirect jobs to other printers on the network. IPP The IPP (Internet Printing Protocol) defines a standard protocol for printing as well as managing print jobs, media, resolution, etc. NetBEUI NetBEUI (NetBios Extended User Interface) is a protocol that was designed for use in small workgroups or LANs. [. . . ] Reset the network interface card to factory default settings. If DHCP, BOOTP and RARP are not used, ensure they have been set to Disable. CANNOT PRINT WITH LPR AND FTP Turn the printer off for 15 seconds and then on again. Check there is a response to the ping command. Check the network cable is correctly connected. [. . . ]