User manual COMPX C4160

[. . . ] • Depois de o ler, guarde-o num local conveniente para fácil consulta. Authorized representative in EU Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany 85464609115001 Printed in Japan EN FR DE IT PT ES • Tras leerlo, almacénelo en un lugar accesible para facilitar su consulta. CV6233219394 Operation Manual Air Conditioning Intelligent Management System C4160 Web Software Thank you for purchasing our monitoring and control system. Before using the system, be sure to read this manual carefully. After reading the manual, store it, in a convenient location for easy reference. Contents Precautions on Using This Product. . . . . . . . . . . . . . . . . . . . . i  Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] :Displays dates and times when alarms are issued/restored. :Displays occurrence/restoration status of alarms. :Displays the status of alarm confirmation by the operator. :Displays the name of the person who confirmed the alarm. * A Special user cannot change the Check and Operator columns. 23 4-5-2-1. Display method Click the , to display the alarm log. The log of alarms occurring to date, and their restoration status, can be checked here. 4-5-2-2. Refining the displayed data Check the checkbox to display only alarms which have occurred. Click again to clear the checkmark and revert the display to its previous state. Check the checkbox to display only alarms which have not been confirmed. Click again to clear the checkmark and revert the display to its previous state. * These two functions can be used in combination. For example, if both the and the display shows only current alarms that are unconfirmed. are checked, the Selecting the indoor unit to display refines the display to cover only that indoor unit. Click by the Search dropdown list to display the registered I/D units. Click on the indoor unit to display. *It is not displayed depending on the setting. If Excel is not installed, the data is displayed in Notepad. * We recommend installing Microsoft Excel to review alarms in detail. * This setting can only be changed by an Administrative user. 26 4-6. Schedule/Results [Procedure] On the menu bar, select “Schedule” – “Schedule/results”. Administrative user  Special user  General user  This displays the schedule and results as bar graphs. The display term can be specified to check the presetting status, the working status of a device relative to its schedule, or other information. Floor/area Date set Sort display Key ･ Address ･ Name ･ Graph : Use to select the dates to display. : Use to select the display order. : Displays the addresses of indoor units. : Displays the names of the indoor units. Lower: Displays results. 27 4-6-1. Display method First, select the floor and area. If the floor and area is “All Floor”, all registered indoor units are displayed. Click the button on the right edge of the floor selection list to display a list of registered floors and areas. From the list, select the floor or area to monitor. [. . . ] This word is used as a contrast with LAN, which is constructed, managed, and operated by the user.  Java Applet Java Applet is a Java application loaded into a Web browser through the network and then implemented.  Communication protocol Set of protocols when computers communicate through a network. It is sometimes called the communication procedure or networking protocol. [. . . ]