User manual COMPX C4201

[. . . ] • Depois de o ler, guarde-o num local conveniente para fácil consulta. Authorized representative in EU Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany 85464609113001 Printed in Japan EN FR DE IT PT ES • Tras leerlo, almacénelo en un lugar accesible para facilitar su consulta. CV6233219370 Operation Manual Air Conditioning Intelligent Management System C4201 Layout Display Software Thank you for purchasing our monitoring and control system. Before using the system, be sure to read this manual carefully. After reading it, store it, in a convenient location for easy reference. Contents Precautions on Using This Product. . . . . . . . . . . . . . . . . . . . . . . 1. Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] After changing the name, click on the button to change the name and close the screen. Click on the button to close the screen without changing the name. 4-1-3-9.  Popup menu “Meter value settings” Use this menu to change the meter value in the accumulated value. When the password screen is displayed by clicking the menu, enter (Password level 2). When the “Meter value settings” screen is displayed, change the Meter pulse count. After changing, click on the button to change the data. Click on the button to restore the data before the change. Click on the button to close the “Meter value settings” screen. 4-1-3-10.  Popup menu “High/low-limit alarm settings” Use this menu to change the high/low-limit alarm value of the analog input. When the password screen is displayed by clicking the menu, enter (Password level 2). When the “High/low-limit alarm settings” screen is displayed, change the high-limit alarm value or lowlimit alarm value. After changing, click on the button to change the data and close the screen. Click on the button to close the screen without changing the data. 14 4-1-3-11.  Popup menu “Output value settings” Use this menu to change the output value of the analog output. Display the Select bitmap screen. * Layout diagrams cannot be created on this system. Contact your dealer or service provider about creating, altering or adding layout diagrams (bitmap files), and related operations.  On the Select bitmap screen, clicking to select the filename for the layout diagram to use highlights the selected bitmap name. Click or double click on the button to close the Select Bitmap screen and display the Bitmap file name on the screen. button to exit without  The Layout diagram settings screen shows the situation with the filename 'O_01F. BMP' selected. *  the selected bitmap filename has already been set on If the Layout master data, the set name is displayed in the Group name and Name columns. 19  Input the group name. If the group name has already been registered, click on the button to display the Select group button to exit file screen. Click to select the name to use, then click or double click on the selection, leaving the display as illustrated below. If the group name is not registered, enter it directly into the text box. It will be registered as a new group name.  Input the name. Use direct input.  Once name registration is complete, click on the button to switch to the registration screens for indoor units etc. button to close the Layout 20 4-2-1-3. Once selection is complete using 4-2-1-1. How to select registered layout diagrams and 4-2-1-2. [. . . ] (The system can be used for a period of 30 days. ) 36 7. Preparation 7-1. Installation 1. First, stop the P-AIMS system. Insert the Layout Display Software C4201 CD of the air-conditioning integrated system (P-AIMS system) you purchased into the CD-ROM drive. The program on the CD-ROM starts automatically and makes preparations for installation. If installation does not start, double-click Setup. exe of the CDROM drive to start it. [. . . ]