User manual COMPX C8173

[. . . ] of your Digital Camera may look somewhat different from those shown in the illustrations in these Operating Instructions. • Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted. Information for Your Safety WARNING: To reduce the risk of fire, electric shock or product damage, • Do not expose this unit to rain, moisture, dripping or splashing. • Use only the recommended accessories. [. . . ] Picture is taken 2 seconds after shutter is pressed. • Exit the menu after it is set. Recording Motion Picture Recording while monitoring camera images During HDMI output, you can record while monitoring motion pictures on the TV, etc. Refer to P76 on how to connect with TV by using HDMI mini cable (optional). Checking the sound while recording motion pictures You can record motion pictures while hearing the sounds that are being recorded by connecting a commercially available headphones to this unit. • Do not use the headphone cables with the length of 3 m (9. 8 feet) or more. • Excessive sound pressure from earphones and headphones can cause hearing loss. • To prevent possible hearing damage, do not listen at high volume levels for long periods. (ENG) VQT4M51 55 DMC-GH3A&GH3H&GH3EB_VQT4M51_eng. book 56 ページ ２０１２年１０月２５日　木曜日　午後５時２５分 Recording Recording still pictures while recording motion pictures Applicable modes: Still pictures can be recorded even while recording a motion picture. (Simultaneous recording) During motion picture recording, press the shutter button fully to record a still picture. • Simultaneous recording indicator A is displayed while recording still pictures. 28 • Recording with the Touch Shutter function is also available. A Recording motion pictures with manually set aperture value/shutter speed (Creative Video Mode) Recording Mode: It is possible to manually change the aperture and shutter speed and record motion pictures. 1 2 3 4 5 Set the mode dial to [ ]. Select [Exposure Mode] in the [Motion Picture] menu. (P23) Press 3/4 to select [P], [A], [S] or [M], and then press [MENU/SET]. • The operation for changing the aperture value or shutter speed is the same as the operation for setting the mode dial to , , or . Start recording. • Press the motion picture button or the shutter button to start recording a motion picture. (Still pictures cannot be taken. ) Stop recording. • Press the motion picture button or the shutter button to stop recording a motion picture. 56 VQT4M51 (ENG) DMC-GH3A&GH3H&GH3EB_VQT4M51_eng. book 57 ページ ２０１２年１０月２５日　木曜日　午後５時２５分 Recording Motion pictures in slow and fast motion Change the number of frames recorded and record motion pictures in slow and fast motion. 1 2 Select [Frame Rate] in the [Motion Picture] menu. (P23) Press 3/4/2/1 to select the item and then press [MENU/SET]. Item [OFF] 40% / 48% / 80% 160%/200%/300% Settings — Records 0. 4 times, 0. 48 times, and 0. 8 times slower Records 1. 6 times, 2. 0 times, and 3. 0 times faster • For example, when a motion picture is recorded for 10 seconds with [200%], the length of the recorded motion picture will be 5 seconds. • Exit the menu after it is set. Minimizing operational sounds during motion picture recording The operational sound of the zoom or button operation may be recorded when it is operated during the recording of a motion picture. Using touch icons allows silent operation while recording motion pictures. • Set [Silent Operation] in the [Motion Picture] menu to [ON]. 1 2 3 Start recording. ¢ To connect to this unit with [Wi-Fi Direct], Android OS 4. 0 or above is required. Connecting to a smartphone/tablet Preparations: • Install the “LUMIX LINK” in advance. [Wi-Fi]/[Fn1] button can be used in two ways, as [Wi-Fi] or as [Fn1] (function 1). At the time of purchase, it is initially set to [Wi-Fi]. • Refer to P25 for details about the function button. 60 VQT4M51 (ENG) DMC-GH3A&GH3H&GH3EB_VQT4M51_eng. book 61 ページ ２０１２年１０月２５日　木曜日　午後５時２５分 Wi-Fi 2 Press 3/4 to select [New Connection], and then press [MENU/SET]. • When connecting with the setting you used before, you can select the connection destination from [Select a destination from History] (P62) or [Select a destination from Favorite] (P62). 3 Press 3/4 to select [Remote Shooting], and then press [MENU/SET]. • The information (SSID and password) required for directly connecting your smartphone/tablet to this unit is displayed. On your smartphone/tablet (The default connection method is set to [Manual Connection]. ) 4 On the setting menu of your smartphone/tablet, turn on the Wi-Fi function. 5 Select the SSID that matches the one displayed on the sceen of this unit, and then enter the password. 6 Start “LUMIX LINK” on your smartphone/tablet. (P60) • When the connection is complete, live images being captured by the camera are displayed on the smartphone/tablet. Taking pictures via a smartphone/tablet (remote recording) Select [ ] on the smartphone/tablet. • Motion pictures are recorded by timer recording. Set the recording time in advance. • You cannot stop motion picture recording halfway from a smartphone/tablet. To stop the recording, operate the camera. • A motion picture is not displayed on the screen of the smartphone/tablet during while its recording is taking place. • The recorded images are saved in the camera. [. . . ] diameter Overall length Mass Dust-proof and splash-proof 98 VQT4M51 (ENG) DMC-GH3A&GH3H&GH3EB_VQT4M51_eng. book 99 ページ ２０１２年１０月２５日　木曜日　午後５時２５分 This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation and/or, (3) open sourced software including the software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www. openssl. org/), and the software written by Eric Young (eay@cryptsoft. com). For the software categorised as (1) and (2), please view the information by pressing [MENU/SET], displaying [Setup] > [Version Disp. ], and then pressing [MENU/SET]. For the software categorised as (3), please refer to the applicable license terms in the following “Operating Instructions for advanced features (PDF format)”. • G MICRO SYSTEM is a lens exchange type digital camera system of LUMIX based on a Micro Four Thirds System standard. • Micro Four Thirds™ and Micro Four Thirds Logo marks are trademarks or registered trademarks of Olympus Imaging Corporation, in Japan, the United States, the European Union and other countries. [. . . ]