User manual COMPX C8754

[. . . ] This appliance is supplied with a moulded three pin mains plug for your safety and convenience. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. [. . . ] If you do not know which type of wireless network router you are using, use “Method 2”. 2 3 Press the WPS button on the wireless router. The unit’s settings are completed when the Wi-Fi® status indicator stops blinking after about 2 minutes and lights blue. The Wi-Fi® status indicator turns off if the connection was not made within the set time limit. If the Wi-Fi® status indicator still turns off, try “Method 2”. 4 ≥ When performing the network settings, place this unit close to the wireless router. ≥ Simultaneous use with other 2. 4 GHz devices, such as microwaves, cordless telephones, etc. , may result in connection interruptions. ≥ Immediately after this unit is turned on, the network setup may take longer to start. ≥ This unit cannot join a wireless network using WEP security settings with “Method 1”. Use “Method 2” to join the wireless network. ≥ To cancel the setting in the middle, press [Í/I] to turn off the unit. ≥ For up-to-date compatibility information on your Wireless router refer to http://panasonic. jp/support/global/cs/ (This site is in English only. ) To use AirPlay, turn to page 9. ≥ To use the WPS PIN code, refer to the notes on page 8. ≥ To edit this system’s name, it is necessary to use “Method 2”. ( 8, “Additional settings”) 6 RQT9658 SC-AP01EBGN~RQT9658. book Page 7 Thursday, March 22, 2012 5:11 PM Method 2 If your wireless network router does not support WPS. *1: “ _ ” stands for a digit that is unique to each set. *2: If you have not changed the name, this unit will be displayed as “Panasonic AP01 _ _ _ _ _ _”. The name that is displayed for this unit can be changed from the “Edit STEREO SYSTEM name” settings in “Method 2”. ( 8, “Additional settings”) 9 RQT9658 Operations Multiple Speakers. . . Network settings SC-AP01EBGN~RQT9658. book Page 10 Thursday, March 22, 2012 5:11 PM Using the remote control app By installing the remote control app “Panasonic Stereo System Remote 2012” onto your iPhone or iPod touch, it is possible to adjust the volume, turn the unit on and off, and adjust various other features of this unit. ≥The following operations and settings cannot be performed from a computer. Visit the following website for details on how to operate the remote control app “Panasonic Stereo System Remote 2012”: http://panasonic. jp/support/global/cs/ (This site is in English only. ) ≥ This application is specially made for iPhone and iPod touch. ≥ Some operations and settings can only be performed by using the remote control app. ≥ Refer to the operating instructions of the iPhone or iPod touch for details about its operations. Installing the app Preparation Connect the iPhone or iPod touch to the Internet. Operations from the remote control app Preparation ≥ Complete the network settings. jCheck that the Wi-Fi® status indicator lights blue. ( 4) If it continues to blink red, check the wireless network settings. ( 6) ≥ Turn on the iPhone or iPod touch. [. . . ] ≥ If several wireless devices are simultaneously using the same wireless network as this unit, try turning off the other devices or reducing their wireless network usage. ≥ With some iOS and iTunes versions, it may not be possible to restart the AirPlay playback if the unit is turned off during the AirPlay playback. In this case, select a different device from the AirPlay icon of the Music app or iTunes and then re-select this unit as the output speakers. ( 9) ≥ If the playback stops, check the playback status on the iOS device or iTunes. [. . . ]