User manual COMPX C8834

[. . . ] You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. electrolux. com Register your product for better service: www. electrolux. com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www. electrolux. com/shop CUSTOMER CARE AND SERVICE We recommend the use of original spare parts. [. . . ] Press the Mode button until the corresponding icon appears. This function stops automatically after 52 hours. To switch off the function before its automatic end: 1. Press the Mode button until the FROSTMATIC indicator flashes. The function switches off by selecting a different freezer set temperature. ded in order not to forget the bottles placed in the freezer for fast cooling. Press the Mode button until the corresponding icon appears. The Timer shows the set value (30 minutes) for a few seconds. Press the Temperature colder button or the Temperature warmer button to change the Timer set value from 1 to 90 minutes. At the end of the countdown the Minute Minder indicator flashes and an audible alarm sounds: 1. Remove any drinks contained in the freezer compartment. Press OK button to switch off the sound and terminate the function. To remove the frost, follow the instructions below: • switch off the appliance and pull out the plug from the wall socket • remove any stored food, wrap it in several layers of newspaper and put it in a cool place • remove the freezer drawers • put insulating material around the drawers, e. g. Defrosting can be accelerated by placing bowls with hot water (not boiling) inside the freezer. • Loosen the drainage channel from its resting position, push it in according to the illustration and collect a water container. 5. 1 Periodic cleaning The equipment has to be cleaned regularly: • clean the inside and accessories with lukewarm water and some neutral soap. • regularly check the door seals and wipe clean to ensure they are clean and free from debris. Do not pull, move or damage any pipes and/or cables inside the cabinet. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will damage the surface and leave a strong odor. Clean the condenser (black grill) and the compressor at the back of the appliance with a brush. This operation will improve the performance of the appliance and save energy consumption. Take care of not to damage the cooling system. When moving the cabinet, lift it by the front edge to avoid scratching the floor. Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. [. . . ] When two appliances are placed beside each other, attach the adhesive spacers between the appliances. Install the spacers on the back side of the panel. 7. 6 Levelling When placing the appliance ensure that it stands level. If necessary adjust the feet using the adjustment spanner supplied. ENGLISH 15 7. 7 Door reversibility 2 To change the opening direction of the door, do these steps: • Remove the plug from the power. Remove the filling and install it on the opposite side of the grille. • Lay down the appliance back side down on a wooden support. [. . . ]