User manual COMPX MFWSG23000

[. . . ] Pass them on to possible new owners of the appliance. Ventilation To ensure good ventilation, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams). Keep packaging material out of the reach of children. [. . . ] iNCREASE TIME button Setting the clock !The clock may be set when the oven is switched off or when it is switched on, provided that a the end time of a cooking cycle has not been programmed previously. After the appliance has been connected to the icon and the four mains, or after a blackout, the numerical digits on the DISPLAY will begin to flash. Press the button several times until the icon and the four digits on the display begin to flash. Use the “+” and “-” buttons to adjust the time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the desired value. Wait for 10 seconds or press the to finalise the setting. This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when the set amount of time has elapsed. Press the icon and the three digits on the display begin to flash. Use the “+” and “-” buttons to set the desired time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the value. Wait for 10 seconds or press the to finalise the setting. The display will then show the time as it counts down. Pull the PROGRAMMER knob and turn it in a anticlockwise direction until the red pointer is aligned with the current time. A click will indicate the end of the programming phase. Turn the PROGRAMMER knob in a anticlockwise direction until the “” symbol appears in the display window. Select the desired cooking mode using the SELECTOR knob. To switch the oven off, turn the SELECTOR knob back to the "0" position. A temperature value can be set for all cooking modes between 60°C and Max, except for • BARBECUE (recommended: set only to MAX power level); • GRATIN (recommended: do not exceed 200°C). / LEAVENING mode / PIZZA mode GB The heating elements (bottom and circular) and the fan come on. This combination heats the oven rapidly by producing a considerable amount of heat, particularly from the bottom element. If you use more than one rack simultaneously, switch the position of the dishes halfway through the cooking process. / BARBECUE mode The oven reaches and maintains a temperature of 40°C irrespective of the position of the THERMOSTAT knob. This mode is ideal for leavening dough made with yeast. [. . . ] GB Disconnect your appliance from the electricity supply before carrying out any work on it. €¢ The stainless-steel or enamel-coated external parts as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and neutral soap. If these stains are difficult to remove, use only specialised products. After cleaning, rinse and dry thoroughly. [. . . ]