User manual CONCEPTRONIC CM3PVRD

[. . . ] Maak op de harde schijf van de CM3PVRD in de map 'VIDEO' een map met de naam van uw DVD film · Congratulations on the purchase of your Conceptronic Media Recorder & Player. This User Manual gives you a step-by-step explanation how to install and use the Conceptronic Media Recorder & Player. When problems occur, we advise you to go to our support-site (go to www. When you have other questions about your product and you cannot find it at our website, contact us by email: support@conceptronic. [. . . ] Tip : Instead of above 3 steps, you can also go to the `TV Tuner Input' and press the `Edit' button (34) on the remote control. You can navigate through the Channel Organizer with the `Navigation' buttons (15) on the remote control. You can use the following actions on the channels in the Channel Organizer: Option Fav. Skip Lock Button (`Red' Button) (5) (`Green' Button) (4) (`Yellow' Button) (37) (`Blue' Button) (36) Description Add the channel to the favorite list Delete the channel from the channel list Skip this channel in the channel list Lock this channel in the channel list To close the Channel Organizer, press the `Return' button (14) on your remote control. The unit has 2 input sources to watch and record programs: · TV-Tuner Input You can watch live TV through the unit by selecting the option `TV Tuner Input' in the Main Menu. While watching live TV, you can change the channels by pressing the `Channel +' (29) or `Channel -' (28) button on the remote control. Note : When the TV Tuner Input is selected from the Main Menu, the unit will go to the Analog TV tuner or Digital TV tuner, depending on the `TV Input Type' setting in the Setup Menu. aV Input (Audio/Video Input) The unit has a Composite Audio/Video-Input on the backside. This Composite Audio/Video Input can be used to connect your VCR, Set-Top Box, Video Camera or other video equipment to the unit. When the Timeshift feature is initialized, the unit will create a buffer of maximum 55 minutes for the Timeshift feature. Note: You need at least 2, 5GB of free space on the HDD to use the Timeshift feature. The recording is stored with a name based upon the record date and time, with the following name: "MMDDhhmm. Recording through the EPG guide (Digital TV only) When you are using the Digital TV tuner of the unit, you can use the EPG guide to schedule a recording. You can navigate through the EPG Guide with the `Navigation' buttons (15) on the remote control. Select the program you want to record in the right row. Manual Scheduled Recording (Analog TV and Digital TV) You can program the unit to record channels on specific times. Control while watching Live TV through the unit. If you have selected the `TV' option, press the `Right' Navigation button (15) and select the channel which you would like to record. Note: When recording to USB or Memory Card, make sure you have a High-speed device attached. Note: Recording in `HQ', `SP' or `LP' influences the quality of your record and the amount of space needed for the record. For example, if you unit is equipped with a 500GB HDD, the record time will be: HQ: 228 hours and 35 minutes. The recording is now programmed as a scheduled recording and the unit will start recording on the programmed time and channel. [. . . ] A/V Set: Video Output TV Type TV Input Type Select the Video Output signal which corresponds with the used output ports on the unit. Set the `TV Type' to the correct aspect ratio of your TV. (`4:3 PS' (Pan & Scan) , `4:3 LB' (Letterbox) or '16:9' (Widescreen)). Set the `TV input type' to the correct tuner you want to use. [. . . ]