User manual CONRAD DATA-LINK-KABEL USB2.0 VERSION 11-03

[. . . ] Start the same program on both PCs in order to transfer data back and forth afterwards. You might have to make additional settings in the network mode (e. Shut down the operating systems of the PCs and turn them off (this automatically closes all open files). [. . . ] However, if a data transfer is taking place via the data link cable and you unplug the cable from the USB port, the PC might crash and damage data. If you plug-in or unplug the data link cable frequently, always plug it back into the same USB port, otherwise you might have to re-install the driver. First install the supplied software on both PCs. Then connect the data link cable to your PCs. With reverse sequence it may happen that the data link cable no longer works properly with the operating system. Please note: with new CD versions, the name of this directory may differ. You might need to restart Windows after installation. You will find a switch on the casing in the middle of the data link cable. This switches between the two operating modes. A) Network mode (switch is not depressed) The data link cable works similar to an external USB network adapter. This means you can release folders or use printers jointly like with a common network. You can also play games in network mode. ) In addition, you can construct a small network with up to 17 PCs with several data link cables of the same type. Connect PC1 with PC2, PC2 with PC3, etc. [. . . ] You might have to restart Windows after installation. Afterwards, there are two different programs available in the data transfer mode. These operating instructions are published by Conrad Electronic GmbH, Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany. [. . . ]