User manual CONTINENTAL EDISON CEFE5ECI3

[. . . ] Continental Edison 120-126, Quai de Bacalan CS 11584 33 067 Bordeaux CEDEX CEFE5ECI3 OPERATING AND INSTALLATION INSTRUCTIONS OF BUILT-IN OVEN Dear Customer, We take offering quality products more than your expactation as goal, offers you the products produced in modern facilities carefully and particularly tested for quality. Your manual is prepared in order to help you to use your appliance that is manufactured by the most recent technology, with confidence and maximum efficiency. Before use of your appliance, carefully read this guide that includes the basic information for right and safe installation, maintenance and use. Contact to the nearest Authorized Service for mounting of your product. [. . . ] Lightly brush the wire grid with oil to stop foods sticking and place foods in the center of the grid. Always place a tray beneath to catch any drips of oil or fat. For roasting chicken; please look at the oven accessories part. It is recommended to pre-heat the oven about 10 minutes. Warning: When grilling, the oven door must be closed and the oven temperature should be adjusted to 1900C. ENERGY SAVING During use of electrical cookers , it is required to use saucepans having flat bases. When liquid starts boling , reduce the temperature setting. Oven door should not be opened often during cooking period. USE OF YOUR PRODUCT Use of digital timer Time Adjustment: A - MODE + The time must be adjusted before starting to use the oven. Following the power supply to the oven, the symbol (A) and the three “0” on the screen will begin to flash. Press the (+) and (-) keys simultaneously. Also, the dot in the middle of the screen will begin to flash. Using the (+) and (-) buttons, adjust the day's time while this dot is flashing. After the adjustment, it should be expected that the dot will be lit continuously. Following the power supply to the oven, when the symbol (A) and the three “0” on the screen begin to flash, the oven can not be operated using the control buttons. When the (+) and (-) buttons are pressed simultaneously for time adjustment, the symbol will appear on the screen. When this symbol appears on the screen, you can manually operate the oven part. As the adjusted time will be reset in the event of a power failure, time adjustment operation willl have to performed again. USE OF YOUR PRODUCT Audible Warning Time Adjustment: A - MODE + The time must be adjusted before starting to use the oven. Following the power supply to the oven, the symbol (A) and the three “0” on the screen will begin to flash. Press the (+) and (-) keys simultaneously. Also, the dot in the middle of the screen will begin to flash. [. . . ] A complete cleaning using dry and powder type cleaners. For product with catalytic enamel frames, the rear and side walls of the inner frame do not require cleaning. However; depending on usage, it is recommended that you replace them after a certain period of time. MAINTENANCE Replacing the Oven Light The change of oven lamp must be done by authorized technician. [. . . ]