User manual CONTINENTAL EDISON CELED24DVDU6

[. . . ] Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. ‘¡ Allow enough space between the receiver and the wall to permit ventilation. ‘¤ Do not install the TV in a location near heat sources such as radiator, air ducts, direct sunlight, or in a place somewhere like close compartment and close area. [. . . ] Press the “MENU” button to enter the OSD menu. Then press “ / ” button to select the “PICTURE” menu. Press “ / ” button to select “Brightness” and press the “ / ” button to enter brightness adjustment menu to adjust brightness. Press “ / ” button to select “Contrast” and press the “ / ” button to enter contrast adjustment menu to adjust contrast. Press “ / ” button to select “Sharpness” and press the “ / ” button to enter sharpness adjustment menu to adjust sharpness. Press “ / ” button to select “Saturation” and press the “ / ” button to enter Saturation adjustment menu to adjust saturation. Press “ / ” button to select “Hue’’ and press the “ / ” button to enter hue adjustment menu to adjust hue. Press “ / ” button to select “Sharpness” and press the “ / ” button to enter sharpness adjustment menu to adjust sharpness. Press “ / ” button to select “Advanceed Settings” and press the “ ” button to enter Advanceed Settings adjustment menu to adjust. 12 SOUND You can select the type of sound, which best corresponds to your listening. Press the “MENU” button to enter the OSD menu. The right side shows the programs in the channel. The selected program is also displayed on the top of the screen. Press the “ / ” button to select the “program”. You can press “RED” button to enter record mode. Press the “ / ” button to select “CH” and press the “ / ” button to select the channel number to see the current channel’s program forecast. Note: The U disk will be formatted when in burning, please do not store important files in the U disk. Subtitle When the source is selected as DTV, users can go to the menu to set. Note: The pictures in regard to function are provided for reference purposes only. Common interface Press the “ / ” button to select Common interface, then press ENTER button to enter sub menu. Only available when there is CI card under DTV. 17 USB Features Press the “SOURCE” button to change to the “MEDIA” source. [. . . ] General Setup TV Display This is used to select the aspect 4:3/Pan Scan, 4:3/Letter Box, Wide. OSD Language This is used to select the OSD language. Italian Spanish Po rtuguese 22 Screen Saver Start the screen saver, the screen saver image will appear when the player stops or the picture is frozen for a few minutes. This saver can keep the screen from being damaged. [. . . ]