User manual CONTINENTAL EDISON CELED24HDU6

[. . . ] Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. ‘¡ Allow enough space between the receiver and the wall to permit ventilation. ‘¤ Do not install the TV in a location near heat sources such as radiator, air ducts, direct sunlight, or in a place somewhere like close compartment and close area. [. . . ] Note: Searching for platform will take a long time, please be patient!DELETE Press “ / ” button to select the program and press “RED” button once to delete the program. SKIP Press “ / ” button to select the channel which you want to skip and press the “BLUE” button to skip . Press “BLUE” button again to cancel the setting. MOVE Press “ / ” button to select the channel and press the “YELLOW” button to move . Then press the “ / ” button to select the channel with which you want to move. Signal information (only use in DTV) Press “ / ” button to select “Signal information” and press the “ENTER” button . PICTURE You can select the type of picture, which best corresponds to your viewing. Press the “MENU” button to enter the OSD menu. Then press “ / ” button to select the “PICTURE” menu. Press “ / ” button to select “Brightness” and press the “ / ” button to enter brightness adjustment menu to adjust brightness. Then press “ / ’’ button to select the “PC Setting” menu. 15 DTV Features Favorite List When the source is selected as DTV, users can enter Favorite List by pressing “FAV” button. The “Favorite List” window is illustrated as follows: Program Information When the source is selected as DTV, you can press “display” button to display the channel’s information. The program information window is illustrated as follows: Audio When the source is selected as DTV, users can enter the Setup menu to enter the “Audio Language” menu . The “audio language” window is illustrated, and press “ / ” button to select the “audio language” menu . 16 Electronic Program Guide（EPG） Electronic Program Guide (EPG) provides program information which will be broadcasted now or in the future. The system will display EPG window by pressing “EPG” button. DATE and TIME information is displayed on the right of the window. The right side shows the programs in the channel. The selected program is also displayed on the top of the screen. Press the “ / ” button to select the “program”. [. . . ] Press ◄ / ► button to select MOVIE in the main menu, then press enter button to enter 2. Press / button to select drive disk you want to watch, then press enter button to enter 3. Press the “exit” button to back to the previous menu. Press ◄ / ► button to select TEXT in the main menu, then press enter button to enter. [. . . ]