User manual CONTINENTAL EDISON CERP800

[. . . ] Keep the appliance and its cord out of reach of children. In order to ensure your children's safety, please keep all packaging (plastic bags , boxes , polystyrene etc. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning. [. . . ] Before connecting to the power, please check whether the type of supply and the mains voltage match with the details given on the rating label on the appliance. Using for the first time, rip off all wrapping paper and plastic bags, then clean the accessories. Press Locking knob (B) down to lift the arm. Lock Bowl Lid(F) into the arm, then insert the whisk (G) or Beater (H) or Hook (I) into outlet(E) (as pic A) till "click" sound (as pic B) to ensure the accessory is inserted well. Insert mixing bowl (D) into the housing and turn the bowl until it locks into place. Fill your ingredients into mixing bowl (D). Cannot over fill ingredients and over time use, or the machine will be destroyed or its performance is not good. Press Locking knob (B) down again and in the same time press down the arm for lock. Plug in then turn Speeds Selector(C) to start the machine and set the right speed. Follow speeds of each accessory as manual suggested. After usage, turn the Speeds Selector(C) back to the "0" to stop machine. Press Locking knob (B) again for taking off the accessory. (0-10 variable speed controls): from Min speed to Max speed ("0" level): OFF, stop the machine ("P" mode level): Pulse function After install the accessory you need, before plug in, make sure the knob is switched to "0" level. Then turn the knob to the speed you need. "0-10 speed" function: Slow speed: turn the knob to the beginning. WARNING: If using Hook (I), the selected speed cannot more than speed 4. If using Beater (H), the selected speed cannot more than speed 8. If using Whisk (G), recommend using the speed 8-10. "Pulse" function: Turn the knob anticlockwise to "P", the machine will start to work under max speed. Once loosen your hand, the knob will turn back to "0" position automatically and stop the machine. [. . . ] Wash all accessories by hand with clear water with washing-up liquid. Rinse and dry thoroughly before reassembling. Accessories and bowl should be washed immediately after use to prevent food from drying on. Before first use, clean the bowl and all accessories with clear water with dishwashing liquid. [. . . ]