User manual CONWIN CLASSIC INFLATORS

[. . . ] Conwin Inflators Instruction Sheet G e n e ra l I n s t r u c ti o n s f o r I n fl a to r s View a dem o Basic Inflato nstration of rs on Cown in's Tools of th e Trade DV D The following instructions apply to all inflators. Follow these instructions first, then consult the specific instructions for your inflator below. Inflator Hook-Up 1. Firmly hand-tighten connection to the cylinder valve by turning the handwheel clockwise. [. . . ] When balloon has reached desired size, remove it from the outlet. Tie balloon using Conwin's balloon tying discs. Tilt Valve Down Push Valve Extension Outlet Push Valve Extension Outlet presses into Push Valve and allows user to inflate both foil balloons and valved latex balloons. Tapered tip adjusts to valved latex balloons and easily slides into the neck of foil balloons. Remove the outlet when inflating 9-inch and larger balloons. Inflator Components Pressure Gauge Latex Balloon Push Valve Outlet Ribbon Cutter Disc Tyer Post Foil Balloon Filling Outlet (Precision Plus) Hand-Tight Connection Precision Plus Foil Balloon Inflation 1. Slide the tapered foil filling outlet into neck of balloon and press upward. When the foil balloon has reached the proper size and pressure, the inflator will automatically shut off the flow of helium. This guarantees maximum balloon flying time and eliminates costly foil balloon breakage. The automatic inflator will work on all size and shape foil balloons. 60/40 Helium Air Inflator Inflating Latex Balloons with a 60/40 Mix of Helium and Air The Fast-Flow Push Valve has a tapered tip to easily fit large size latex balloons. Place the balloon over the latex outlet and press downward until balloon has reached desired size. Use Conwin's Balloon Tying Disc to quickly and easily tie and attach ribbon (see back page). Inflate Latex Balloons with 100% Helium By covering the air intakes, the 60/40 Helium/Air Inflator will also inflate balloons with 100% helium. Cover the air intakes with your fingers or with tape for prolonged use with 100% helium. Use Conwin's Balloon Tying Disc to quickly and easily tie and attach ribbon (see back page). Conwin Inflators Instruction Sheet Dual-Outlet and Triple-Outlet Speed Inflators Hook-Up & Removal Tips For best results during hook-up, hold the inflator at a 45 degree angle and when the connection starts to get tight pull the inflator down to the proper horizontal position and firmly tighten in place. For extra leverage during removal, push inflator arm upward in a counter-clockwise motion while unscrewing inflator from cylinder. [. . . ] Is your portfolio up to date on the latest?Conwin's Portfolio Builder images are the perfect solution for making winning presentations to your clients. Thirty-two photo quality images are available in the full series. Visit www. ConwinOnline. com today! [. . . ]