Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual COPPER JOHN ANTS. We hope that this COPPER JOHN ANTS user guide will be useful to you.
Lastmanuals help download the user guide COPPER JOHN ANTS.
Detailed instructions for use are in the User's Guide.
[. . . ] You will need to adjust your scope level later during set up.
Always use a open end wrench that is the proper size when making adjustments in this area. Pliers or adjustable wrenches can damage the nut and ruin your sight.
A. N. T. S Assembly cont.
Horizontal Block Windage Block Locking Screw
Step 5 Insert the Double Axis assembly into the Windage Block. Make sure the horizontal stop screw is all the way against the Windage Block. [. . . ] Allow it to settle and then open to see if the bubble is level. Tilt the frame on the bar until this test comes out level. If you would like to level the frame with the string, put your bow on a flat table and level the string by shimming the bow. Tilt the frame into position and tighten the screws. Once the screws are tight, recheck.
Compare and tighten Shooting String
Getting the most out of your A. N. T. S
Using the Adjustment Knobs and the Scale Both the Elevation Knob and the Windage Knob have a number scale and they are labeled up/down, left/right for your convenience. The numbers on your knobs are related to the hash marks on the scale. If you start with the knob on Zero, and rotate it one full turn, it will move one number or hash mark on the scale. There are 20 clicks between each number. When getting sight marks, note the number on the scale and the number on the knob. This will help you get the tightest marks possible and it will get you right back to the perfect spot everytime
Adjusting your sight and counting clicks It is handy to know how much distance a click represents when you are using your sight. This will help you get on target faster and stay on target with a minimum of guesswork. The distance is expressed in Minute Of Angle or MOA. The MOA is 5/32 of an inch at 100 yards on an A. N. T. S. This means that one click on windage or elevation equals 5/32 of an inch at 100 yards. [. . . ] No agent, employee, or representative of Copper John Corp. or its dealers has the authority to bind Copper John Corp. Buyer agrees that the sole and exclusive remedies for breach on any warranty concerning Copper John A. N. T. S. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE COPPER JOHN ANTS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual COPPER JOHN ANTS will begin.
