User manual CORNILLEAU PRO 510 OUTDOOR

[. . . ] Assembly and operating instructions Please keep for future reference Thank you for choosing a Cornilleau Table Tennis Table, and we would like to give you some advice for the best use of your table. Prior to assembly or use, please read these instructions carefully. tECHNICAL CHARACTERISTICS Outdoor tabletop: 7 mm laminate resin tabletop MAT TOP finish with steel frame 60 mm. [. . . ] The manufacturer will not be liabile for any injury caused through misuse of the table. GAME Manuals on how to play table tennis as a sport are available from bookshops. The table must be assembled by at least 2 adults following the numerical order of the assembly instructions. Before assembling, please check that all the correct parts are contained in the package. The quantities indicated make it possible to go through the operations necessary for each assembly stage. Even with a cover, INDOOR tables can be damaged if used or stored outside. According to standard DIN 7898 these tables are classified under category C or D. Deformation in each tabletop less than 10 mm thick cannot be considered as a fault. Do not sit or stand on the table, because of the risk of collapse. Wind may make the table tip over, damage it or, more seriously, cause personal injury. Keep these instructions and refer to them during maintenance operations and when ordering spare parts from the parts list on the last page. To facilitate processing of orders for spare parts, indicate the type of table and the series number to be found on the underside of the tabletop in the top left hand corner. For maintenance on the game surface, do not use aggressive products (abrasives, solvents or acids); we recommend our regenerative cleaner. All tables manufactured by us come with a 3-YEAR warranty as from the date of purchase. [. . . ] Non-compliance with the above instructions for use may result in damage to the table or injury and excludes any liability of the manufacturer. Cornilleau SA make constant improvements to the product, the manufacturer reserves the right to make technical and dimensional modifications without these instructions being binding on us. Assembly during all stages with 2 people. [. . . ]