User manual CORSAIR CX430 V2 80PLUS BRONZE

[. . . ] 4 Remedies Corsair’s entire liability and your exclusive remedy for any breach of warranty shall be, at Corsair’s exclusive discretion: 1) to repair or replace the hardware, or 2) to refund the price paid, provided that the hardware is returned to the original place of purchase, or another place as directed by Corsair, with the original sales receipt (or a valid copy thereof). You may be required to pay shipping and handling charges, as well as any applicable tariffs, duties, taxes, or other fees, except where prohibited by applicable local law. Corsair may, at its exclusive discretion, use new, or used/refurbished parts in good working condition, to repair or replace the hardware. Any repaired or replacement hardware will be warranted for the remainder of the original warranty period, or thirty (30) days, whichever is greater, or for any additional period of time that is specified by law in your local jurisdiction. [. . . ] With features usually reserved for premium power supplies, it’s a great choice for systems where continuous and reliable power delivery and low noise are essential. Corsair Advantages • • • • • • • • Your Corsair Builder Series power supply is packed with the latest technology and features: It supports the latest ATX12V 2. An ultra-quiet 120mm fan delivers excellent airflow at an exceptionally low noise level by varying fan speed in response to temperature. 80%+ energy efficiency at 20%, 50% and 100% load conditions means less heat generation and lower energy bills. No more hassle of flipping that tiny red switch to select the voltage input!A dedicated single +12V rail offers maximum compatibility with the latest components. Over-voltage and over-power protection, under-voltage protection, and short circuit protection provide maximum safety to your critical system components. extra long fully-sleeved cables support full tower chassis. A three year warranty and lifetime access to Corsair’s legendary technical support and customer service. 8A 3A 430W B U I L D E R S E R I E S™ Package Contents • • • • Corsair Builder Series power supply unit AC power cord Cable ties Mounting screws Corsair Cable Configuration MODEL Qty. Peripheral Cable Connectors per Cable Length Notes: • Floppy connectors are attached to the end of the peripheral cable. € The ATX power connector has a detachable 4-pin mechanism in order to support either a 24-pin or a 20-pin socket on the motherboard. € The EPS12V power connector has a detachable 4-pin mechanism in order to support either an 8-pin socket or a 4-pin “P4/12V” socket on the motherboard. B U I L D E R S E R I E S™ Installation Before proceeding with installation, please read this manual in its entirety. Step A: Removing your existing power supply If you are building a new system, skip to Step B. Disconnect the AC power cord from your wall outlet or UPS and from the existing power supply. Disconnect all the power cables from your video card, motherboard and all other peripherals. Follow the directions in your chassis manual and uninstall your existing power supply. Step B: Installing the Corsair Builder Series power supply 1. Make sure the power supply’s AC power cable is not connected. Follow the directions in your chassis manual and install the power supply with the screws provided. The main 24-pin power cable has a detachable 4-pin mechanism in order to support either a 24-pin or a 20-pin socket on the motherboard. [. . . ] Other cables might not be compatible and could cause serious damage to your system and power supply. The 24-pin main power connector has a detachable 4-pin connector. This 4-pin connector is not a P4 or ATX 12V connector. Do not force this cable in the P4 or ATX +12V socket on the motherboard. [. . . ]