User manual CORSAIR ENTHUSIAST TX950W

[. . . ] If, prior to using the Product, you decide you are unwilling to agree to the terms of this agreement, promptly return the Product and the accompanying items (including written materials and binders or other containers) to Corsair Memory or the Corsair Memory authorized distributor from whom you obtained the Product and accompanying items. If you have already paid for the Product, provide us with your proof of purchase and we will refund the fees you have paid for these items to you. Limited Warranty and Limitation of Liability The Product is guaranteed for sixty (60) months from the date of delivery to the end-user against defects in materials or workmanship. During this period, the Product will be repaired or have parts replaced, at our discretion, provided that: (I) the Product is returned to the agent from whom it was purchased with shipping prepaid; (II) the Product has been purchased by the end-user and not used for hire purposes; (III) the Product has not been misused, handled carelessly, or other than in accordance with any instructions provided with respect to its use; (IV) the Product has not been damaged due to acts of nature, such as lighting, fire, flood, or earthquake; (V) the warranty stickers have not been removed or tampered with. [. . . ] Ultra-quiet 120mm (140mm on TX750W, TX850W, and TX950W) double ball-bearing fan delivers excellent airflow at an exceptionally low noise level by varying fan speed in response to temperature. ⷠ80%+ energy efficiency at 20%, 50% and 100% load condition for less heat generation and lower energy bills · No more hassle of flipping that tiny red switch! ⷠDedicated single +12V rail offers maximum compatibility with the latest components. ⷠOver Current/Voltage/Power Protection, Under Voltage Protection, and Short Circuit Protection provide maximum safety to your critical system components. Extra long fully-sleeved cables support full tower size chassis. 5 year warranty and lifetime access to Corsair's legendary technical support and customer service. Note: The ATX power connector has a detachable 4-pin mechanism in order to support either a 24-pin or a 20-pin socket on the motherboard. Note: The EPS12V power connector has a detachable 4-pin mechanism in order to support either an 8-pin socket or a 4-pin "P4/12V" socket on the motherboard. Installation Before proceeding with installation, please read this manual in its entirety. Step A: Replacing your existing power supply If you are building a new system, skip to Step B. Disconnect the AC power cord from your wall outlet or UPS and from the existing power supply. Disconnect all the power cables from your video card, motherboard and all other peripherals. Follow the direction in your chassis manual and uninstall your existing power supply. Make sure the power supply's AC power cable is not connected. Follow the directions in your chassis manual and install the power supply with the screws provided. The main 24-pin power cable attached to the power supply has a detachable 4-pin mechanism in order to support either a 24-pin or a 20-pin socket on the motherboard. If your motherboard has a 24-pin socket, you may connect the 24-pin main power cable from the TX Series directly to your motherboard. If your motherboard has a 20-pin socket, you must detach the 4-pin cable from the 24-pin connector, and then plug the 20-pin cable onto your motherboard without connecting the 4-pin connector. If your motherboard has an eight-pin +12V socket, connect the eight-pin cable directly to your motherboard. If your motherboard has a four-pin socket, detach the four-pin from the eight-pin cable, and then plug the correct 4-pin directly to your motherboard. [. . . ] Warranty is voided once the cover is removed. Please operate the power supply in a safe and dry environment. Do not insert any objects into the open ventilation or fan grill area of the power supply. the 24-pin main power connector has a detachable 4-pin connector. [. . . ]