User manual COWON IAUDIO U5 VERSION 1.3

[. . . ] · The software described in this document including JetAudio are copyrighted by COWON SYSTEMS, INC. · JetAudio may only be used in accordance with the terms of license agreement and cannot be used for any other purposes. · The media conversion feature in JetAudio may only be used for personal use only. Use of this feature for any other purposes may be considered a violation of the international copyright law. [. . . ] Touch <, > buttons briefly to change the tuning frequency at 0. 1Mhz step. Touch and hold <, > buttons scan for the nearest FM radio station with good reception. - If you were listening to FM Radio before turning off the player, the player will automatically start with the FM Radio when turned on. - Earphone wire works as an antenna for FM Radio signals and thus improves the quality of reception when straightened. Setting and Using Preset Channels Setting preset channels to favorite stations avoids manual scanning through all frequencies. Preset List 01 02 03 04 05 06 07 91. 90Mhz None None None None None None Preset List 01 02 03 04 05 06 07 91. 90Mhz None Listen Ch None Save Current Ch None Delete Ch None None None Preset List 01 02 03 04 05 06 07 91. 90Mhz 107. 70Mhz None None None None None iAUDIO 7 30 Using Advanced Features 1. After the player is turned on, select the FM Radio mode. Tune to the favorite station and touch "PLAY" button. A "PRESET" icon will appear on the status bar at the bottom of the screen, and the player switches to Preset mode. Press "MENU" button to display Preset List screen. Touch <, > buttons to the desired channel and then touch and hold "PLAY" button to open a pop-up window. Select "Save current Ch" to add the current frequency to the preset channel. Listen to the preset channels by selecting "Listen Ch" or delete preset channels by selecting "Delete Ch". Touch "PLAY" button in the preset mode to return to a manual tuning mode. During recording, touch the "PLAY" button to pause or resume the recording. Touch "REC" button to end recording. To play recorded files, touch "PLAY" button. - Recorded files are stored in "VOICE" folder if recorded via built-in microphone, or in "RECORD" folder if recorded via Line-In cable. - To use JetEffect, Fast-forward and rewinding capabilities, the recorded audio files should be played in Music mode. - If the player was in Record mode before turning the player off, the player will start with the Record mode when turned on again. - Sound quality and capacity of recordings may vary according to reception quality and recording settings. See the section 4. 7 for further information 3. 4 Viewing Images PICTURE DSC01. jpg DSC02. jpg DSC03. jpg DSC04. jpg View DSC05. jpg Wall Paper DSC06. jpg DSC07. jpg SlideShow iAUDIO 7 Using Advanced Features 1. Connect iAUDIO and computer with the USB cable. Transfer (copy) the image files from PC to iAUDIO. After the player is turned on, select Picture mode by pressing "MENU button then choosing Picture icon. Thumbnail view of images will appear on the screen. [. . . ] Any video file that has not been encoded with COWON MediaCenter - Jetaudio may not play in iAUDIO. iAUDIO does not have a separate antenna. Instead it uses earphone wire to receive FM Radio signals. Stretching the wires may enhance the reception quality. [. . . ]