User manual CREATIVE D100 QUICK START GUIDE

[. . . ] It restores the details, expands the music to surround sound and creates an experience that goes beyond studio quality. Most downloadable music and movies are compressed; making downloads fast, and storage and portability convenient. The downside is that the quality and fullness of your songs and soundtracks are diminished. X-Fi Crystalizer analyzes audio, identifies the elements that have been restricted/damaged during compression and re-masters them by selective audio enhancement. [. . . ] When you connect Xmod to your computer, audio output from your After connecting Xmod to your PC or Mac, connect earphones or speakers. Connect Xmod to your earphones for personal enjoyment, or to your speaker system to share the experience with everyone in the room. Xmod channels sound to your earphones instead of your speakers. To hear sound from your speakers, disconnect the earphones. ⷠFor the best listening experience, position your speakers about 0. 5 feet apart, and at a height around your ear level. ⷠBefore using earphones, decrease the volume level on Xmod or from your computer. If not, press and release the Select button until the Volume LED lights up in blue. The higher the level, the faster the LED flashes. The higher the level, the faster the LED flashes. Using a Microphone with Xmod 9 Using a Microphone with Xmod X-Fi enhancements are only available to audio output during Playback, and are not applied to recordings made from the Xmod Line-In/Microphone jack. The audio enhancements on the headphones or earphones may interfere with the X-Fi enhancements on Xmod. How do I configure DVD playback for surround sound, if I play it on my PC or Mac?On your software DVD player, configure the player for 5. My notebook displays a warning message when I connect Xmod. Certain models of notebooks are highly sensitive to the amount of power initially drawn by USB-compatible devices. Creative has tested Xmod with many hardware platforms and using Xmod with your notebook will not result in damage from power draw. How do I reset the X-Fi enhancements to their default level?1 Press the Select button twice so that the X-Fi Crystalizer LED starts blinking. 2 Press and hold the Select button and the Level Control until all three LEDs blink three times. Com, select your region and then select Support. Registering your product ensures you receive the most appropriate service and product support available. [. . . ] Do not dismantle or attempt to repair your product. Do not expose your product to temperatures outside the range of 0°C to 45°C (32°F to 113°F). ⷠDo not pierce, crush or set fire to your product. ⷠKeep your product away from strong magnetic objects. [. . . ]