User manual CREDA HB37069

[. . . ] q Allow the air inlet at the back of the dryer, the air outlet or vent hose to be obstructed. q Direct the vent hose outlet towards the air intake at the back of the machine. q Allow the tumble dryer to recycle exhaust air. q Switch the machine off leaving a hot load in the drum. [. . . ] You must terminate every programme with the Cool Tumble Phase. Always separate laundry into the correct fabric groups before washing and drying. See that all zips are closed, hooks and eyes are fastened and belt, strings etc. are tied loosely in bows, you will normally have done this for each item before the washing stage. It is important to extract as much water as possible from each item before drying. WARNING: CLOTHES SHOULD NEVER BE LOADED DRIPPING WET 4. Make sure that the items to be dried are suitable for tumble drying, or are not of a type requiring `special attention' (see"Wash Care Labels" section). Maximum load size Your dryer will hold a load of 5kg (11lb) dry weight of natural fabrics. if you are drying items of man-made fibres (synthetic or acrylics), the maximum load should not exceed 3kg (6. 6lb) dry weight. This difference is that man-made fibres require more space to tumble-dry without creasing. WARNING: DO NOT OVERLOAD AS THIS COULD RESULT IN REDUCED DRYING PERFORMANCE AND A POSSIBLE FIRE HAZARD. All you have to do is turn the Timer control clockwise until the required time appears in line with the indicator. Do not rotate the knob beyond 120 minutes (maximum drying time) or past the zero stop. If you have selected more time than you require turn the knob anti-clockwise to select the correct time required. This operation also starts the dryer, provided the door is closed and the machine is plugged in. The"Guide to Drying Times" section will tell you how much time you will need for various loads. Options - Reversair/Reverse Action Models These models have a heat switch and on selected models a Filter care light. Timer Control Turn the timer clockwise to select the required drying time. The drying time for both heat settings is controlled by the timer. All you have to do is turn the Timer Control clockwise until the required drying time appears in line with the indicator. Never wind the timer control anti-clockwise. This operation also starts the dryer, provided the door is closed and the machine is plugged in. The "Guide to Drying Times" section will tell you how much time you'll need for various loads. 14 Options - Sensair/Reversair Automatic ECO models These models have a heat selection switch, an automatic/Eco light. [. . . ] Problem `It won't start' Check these things first 1. Is the machine plugged in and switched on at the socket?Is the Timer Control set to required programme/time?Has the fuse blown, either in the plug or the main fuse box? [. . . ]