User manual CREDA HB41300

[. . . ] Inside the pack containing this manual, you will also find the guarantee and all the details necessary for installation. If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washing machine. Connecting the electricity and water supplies Connecting the water inlet hose !Before connecting the inlet hose to the water supply, run the water until it is perfectly clear. [. . . ] If the selected option is not compatible with the selected wash cycle, this incompatibility will be signalled by the flashing of the indicator light and a sound alert (3 beeps); the option will not be activated. If the selected option is not compatible with another option that has been selected previously, the indicator light corresponding to the first option selected will flash and only the second option will be activated; the indicator light corresponding to the button will remain lit in a constant manner. The options may affect the recommended load value and/or the duration of the cycle. The corresponding indicator light remains lit in a fixed manner and the porthole door locks (the LOCK indicator light illuminates). The icons corresponding to the wash cycle phases will light up during the cycle to indicate which phase is currently in progress. To change a wash cycle once it has already started, pause the washing machine by pressing the START/PAUSE button; then select the desired cycle and press the START/PAUSE button again. To open the door during a wash cycle, press the START/PAUSE button; if the LOCK indicator light is switched off you may open the door. Press the START/ PAUSE button again to restart the wash cycle from the point at which it was interrupted. This is indicated by T the illuminated text END. The porthole door may be opened immediately. If the START/PAUSE indicator light is flashing, press the button to end the cycle. When dosing the bleach, be careful not to exceed the “max” level (see figure). To bleach laundry without carrying out a full wash cycle, pour the bleach into the compartment 3, select the “Rinse” cycle and activate the “Super Wash” option . It cannot be used in conjunction with , , , , , , , , . Super Wash By selecting this option, the efficiency of the rinse is increased and optimal residual detergent removal is guaranteed. It is particularly useful for skin which is sensitive to detergents. We recommend this option is used with a full load of washing, or when a large amount of detergent is required. It cannot be used in conjunction with , , , , . By selecting this option, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of the cycle the washing machine drum will rotate slowly; the “Easy Iron” and START/PAUSE indicator lights will flash. To end the cycle press the START/PAUSE button or the “Easy Iron” button. It cannot be used in conjunction with , , , , . [. . . ] the washing machine door remains locked. €AutoDose disabled, use the • Indicates malfunctioning of the AutoDose system. Use the machine traditionally, dispenser drawer” appears on the by pouring the detergent and fabric softener required for a wash cycle into display. The drawer, and contact the Assistance service to establish the cause(s) of the malfunction. [. . . ]