Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CREDA HB86610. We hope that this CREDA HB86610 user guide will be useful to you.
Lastmanuals help download the user guide CREDA HB86610.
Detailed instructions for use are in the User's Guide.
[. . . ] The installation cavity should have the dimensions indicated in the figure. Fastening hooks are provided, allowing you to fasten the hob to tops that are between 20 and 40 mm thick. To ensure the hob is securely fastened to the top, we recommend you use all the hooks provided. hooking position for top H=40 mm
40
Back
! [. . . ] The socket can withstand the maximum power of the appliance, which is indicated on the data plate. The voltage is in the range between the values indicated on the data plate. The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it. Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible. The cable must not be bent or compressed. The cable must be checked regularly and replaced by authorised technicians only (see Assistance). The manufacturer declines any liability should these safety measures not be observed. If the appliance is to be installed above a built-in electric oven, the electrical connection of the hob and the oven must be carried out separately, both for electrical safety purposes and to make extracting the oven easier. Electrical connection
The electric hobs are supplied without power supply cable since the cable must be sized according to the type of electrical connection used (see attached connection diagram). Follow these steps to connect the cable: • Open the terminal box by removing the screws "V" and opening the cover (see figure). Ensure that power supply cables of other electrical appliances do not come into contact with the hot parts of the hob. The openings and slots used for ventilation and heat dispersion must never be covered. Make sure the knobs are in the “•”/” ” position when the appliance is not in use. When unplugging the appliance always pull the plug from the mains socket, do not pull on the cable. Never carry out any cleaning or maintenance work without having unplugged the plug from the mains. In the case of a malfunction, under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance. contact a Service Centre (see Assistance). Always make sure pan handles are turned towards the centre of the hob in order to avoid accidental burns. Do not leave the electric plate switched on without a pan placed on it. Do not use cookware with uneven or deformed bottoms. [. . . ] For roasting (average) For roasting (above average) --------For browning and reaching a boil in a short time
!Before using the hot plates for the first time, you should heat them at maximum temperature for approximately 4 minutes, without any pans. During this initial stage, their protective coating hardens and reaches its maximum resistance. 12
Maintenance and care
Switching the appliance off
Disconnect your appliance from the electricity supply before carrying out any work on it. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CREDA HB86610
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CREDA HB86610 will begin.
