Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CREST AUDIO IPRO ONE. We hope that this CREST AUDIO IPRO ONE user guide will be useful to you.
Lastmanuals help download the user guide CREST AUDIO IPRO ONE.
Manual abstract: user guide CREST AUDIO IPRO ONESPECIFICATIONS
Detailed instructions for use are in the User's Guide.
[. . . ] The mic input has polarity, 20 dB pad, +48 V phantom power, on/off switch, and an adjustable low cut filter with gain control. The parametrics section have two adjustable EQ's. Both have on/off switches, and the second has a switch to side change into the dynamics section. [. . . ] A mic enable switch (also with LED indication) will be provided. The line input will be TRS balanced and high impedance, suitable for use with an electric guitar (200K ohms), and have 1/4" jacks. It will have a gain adjustment range from off to +20 dB. There will be a TRS insert jack that functions for both inputs on the rear panel with a front panel enable switch with LED indication. EQUALIZATION: In series with the microphone pre-amp only will be an adjustable second order high pass filter with a corner frequency range of 10 Hz to 350 Hz. Two fully adjustable parametric equalizers will be provided with a 24dB to +12dB boost/cut range and a bandwidth adjustment of 2 octaves to 1/6 octave. The low band will have
a frequency range of 40 Hz to 4 KHz, the high band will have a frequency adjust range of 150 Hz to 15 KHz. Each parametric will have an enable switch with LED indication. The high band parametric filter will additionally have a switch that will move its position out of the main audio path and into the compressor's sidechain (after the side-chain insert jacks return). DYNAMICS: The IPro One will have an adjustable dynamics section that will have a compressor, an expander, and a limit function. The expander will have threshold (-80 dBu to +10 dBu) and ratio (1:1 to 1:5) controls. The compressor will have threshold (-40 dBu to +20 dBu), ratio (1:1 to infinite:1), and makeup gain (0 dB to +20 dB) controls. The limit will have only a threshold (0 dBu to +22 dBu) control with a red "active" LED. A twelve step gain reduction LED array will indicate for all three dynamic functions. [. . . ] A twelve segment LED output meter array will be included. It will monitor either the pre-amp signal (to assist in setting the mic input gain or line level), or the main output, determined by a selector switch. The output jacks will consist of a 1/4" unbalanced and an XLR balanced jack on the rear panel. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CREST AUDIO IPRO ONE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CREST AUDIO IPRO ONE will begin.
